|
Antoine
|
|
|
Group: Forum Members
Posts: 3,
Visits: 1
|
Hello, I work on Raspberry Pi and ADS-B receivers to feed FR24 and Radarvirtuel and yesterday I discovered the Stratux project. I tested it with Foreflight and could see my local traffics  . But I'm flying in Europe and I love SD, is there a way to use Stratux signals with SD ? Or stratux's support can be added in addition of Flarm ? Regards, Antoine
|
|
|
|
|
neubamat
|
|
|
Group: Forum Members
Posts: 19,
Visits: 18
|
Got my MPU9250+BMP280 module today and connected it to raspberry's GPIO pins. I'm seeing traffic in SD with the latest stratux release... as expected 
|
|
|
|
|
rg
|
|
|
Group: Forum Members
Posts: 109,
Visits: 1.9K
|
+xGot my MPU9250+BMP280 module today and connected it to raspberry's GPIO pins. I'm seeing traffic in SD with the latest stratux release... as expected Can you post a link to the module you purchased?
|
|
|
|
|
neubamat
|
|
|
Group: Forum Members
Posts: 19,
Visits: 18
|
+x+xGot my MPU9250+BMP280 module today and connected it to raspberry's GPIO pins. I'm seeing traffic in SD with the latest stratux release... as expected Can you post a link to the module you purchased? Yes, it's a MPU9250 BMP280 10DOF. I bought it from a local/german seller, but the linked one looks exactly like mine. Mapping to raspberry pins (fsync isn't required/available): - 3V3 - pin 1
- GND - pin 6
- SCL - pin 5
- SDA - pin 3
|
|
|
|
|
Telefisch
|
|
|
Group: Forum Members
Posts: 6,
Visits: 0
|
Hello, I also tried the MPU9250-BMP280 Module.
On stratux page, I got traffic, GPS and AHRS Data.
In SD I couldn‘t See anything.
Connected via GDL90 and got position from stratux but no traffic.
Under menu traffic, I only have a black background with a thin red cross.
Any ideas?
|
|
|
|
|
neubamat
|
|
|
Group: Forum Members
Posts: 19,
Visits: 18
|
+xHello, I also tried the MPU9250-BMP280 Module. On stratux page, I got traffic, GPS and AHRS Data. In SD I couldn‘t See anything. Connected via GDL90 and got position from stratux but no traffic. Under menu traffic, I only have a black background with a thin red cross. Any ideas? Try Setup - Navigation Options - Other Traffic and increase "Show Within Vertically" threshold. SD filters irrelevant traffic to declutter your map.
|
|
|
|
|
Viscab
|
|
|
Group: Forum Members
Posts: 1,
Visits: 1
|
I would love if this thread could be kept alive, I'm considering building a stratux with ahrs myself, and would love if it got integrated in to skydemon
|
|
|
|
|
Telefisch
|
|
|
Group: Forum Members
Posts: 6,
Visits: 0
|
+x
Try Setup - Navigation Options - Other Traffic and increase "Show Within Vertically" threshold. SD filters irrelevant traffic to declutter your map. Thanks for that Tip,
I'll give it a try, next time the weather will let me fly.
|
|
|
|
|
Telefisch
|
|
|
Group: Forum Members
Posts: 6,
Visits: 0
|
+x+x
Try Setup - Navigation Options - Other Traffic and increase "Show Within Vertically" threshold. SD filters irrelevant traffic to declutter your map. Thanks for that Tip,
I'll give it a try, next time the weather will let me fly. Ok, meanwhile I went flying and was a bit disappointed. I thought, that perhaps I could see Mode-S Transmitters but that was a fault. Even a SAR-helicopter in AD-Pattern wasn't visible in Stratux / SD so I think it is useless weight here in germany.
|
|
|
|
|
rg
|
|
|
Group: Forum Members
Posts: 109,
Visits: 1.9K
|
Have you installed the latest stratux software? And if so have you got the ahrs chip (which includes the baro sensor)? If no baro sensor you’ll not see traffic in SkyDemon unless you downgrade stratux software to 1.2 but you should see the traffic on the stratux web page.
|
|
|
|
|
Telefisch
|
|
|
Group: Forum Members
Posts: 6,
Visits: 0
|
Yes, I have installed the MPU9250-BMP280. If Software is at latest version, I need to check. But as I know by now, most Transponders do obviously not send position signals. 
|
|
|
|
|
TouchTheSky
|
|
|
Group: Forum Members
Posts: 153,
Visits: 4.4K
|
+xHave you installed the latest stratux software? And if so have you got the ahrs chip (which includes the baro sensor)? If no baro sensor you’ll not see traffic in SkyDemon unless you downgrade stratux software to 1.2 but you should see the traffic on the stratux web page. Sorry for coming back to this topic. Can someone confirm that the baro sensor is required to see traffic in SD?
|
|
|
|
|
rg
|
|
|
Group: Forum Members
Posts: 109,
Visits: 1.9K
|
+x+xHave you installed the latest stratux software? And if so have you got the ahrs chip (which includes the baro sensor)? If no baro sensor you’ll not see traffic in SkyDemon unless you downgrade stratux software to 1.2 but you should see the traffic on the stratux web page. Sorry for coming back to this topic. Can someone confirm that the baro sensor is required to see traffic in SD? Yes it is.
|
|
|
|
|
TouchTheSky
|
|
|
Group: Forum Members
Posts: 153,
Visits: 4.4K
|
Is there any particular reason for it?
|
|
|
|
|
rg
|
|
|
Group: Forum Members
Posts: 109,
Visits: 1.9K
|
|
|
|
|
|
TouchTheSky
|
|
|
Group: Forum Members
Posts: 153,
Visits: 4.4K
|
|
|
|
|