Stratux

Important: These forums are for discussions between SkyDemon users. They are not routinely monitored by SkyDemon staff so any urgent issues should be sent directly to our Customer Support.

Stratux

Author	Message
TouchTheSky	T TouchTheSky posted 10/28/2024 5:27:21 PM Post Details Share Post
T Group: Forum Members Posts: 153, Visits: 4.3K	+x Fliy - 10/28/2024 4:39:20 PM +x TouchTheSky - 2/11/2022 1:46:51 PM +x KeiXiD - 2/11/2022 12:50:55 PM This setting was at 12500ft so it should display targets. One more thought: did you try to enable and use "FLARM Devices" Air Avionics AT-1 as the location source? Did you set the Stratux IP to 192.168.1.1? Mine is set to 192.168.10.1 and Mode-S-Signals doesn't appear on SD and even I cannot connect via Air Avionics AT-1 (only by GDL 90). Is the reason for this problem the wrong IP address I have chosen? Maybe yes but latest Stratux version supports BLE and works nicely with SkyDemon. No WiFi issues any more...
	Reply Like 2
Fliy	F Fliy posted 10/28/2024 4:39:20 PM Post Details Share Post
F Group: Forum Members Posts: 7, Visits: 29	+x TouchTheSky - 2/11/2022 1:46:51 PM +x KeiXiD - 2/11/2022 12:50:55 PM This setting was at 12500ft so it should display targets. One more thought: did you try to enable and use "FLARM Devices" Air Avionics AT-1 as the location source? Did you set the Stratux IP to 192.168.1.1? Mine is set to 192.168.10.1 and Mode-S-Signals doesn't appear on SD and even I cannot connect via Air Avionics AT-1 (only by GDL 90). Is the reason for this problem the wrong IP address I have chosen?
	Reply Like 2
KeiXiD	K KeiXiD posted 2/12/2022 1:57:54 AM Post Details Share Post
K Group: Forum Members Posts: 4, Visits: 0	Im pretty sure there were some planes near
	Reply Like 5
KeiXiD	K KeiXiD posted 2/12/2022 1:41:35 AM Post Details Share Post
K Group: Forum Members Posts: 4, Visits: 0	I use Flarm with AirConnect but do not use the Setting „Air Avionics“ i will try that the next time thanks
	Reply Like 5
Peter Robertson	Peter Robertson posted 2/12/2022 12:43:55 AM Post Details Share Post
Group: Forum Members Posts: 48, Visits: 140	To see Bearingless Targets in SD, you must use the FLARM Protocol. GDL90 does not include Bearingless Target data. You also need to select ‘Show Bearingless Targets’ in SD / Settings / Navigation Options - it is ‘OFF’ by default.
	Reply Like 5
Adam Erchegyi	Adam Erchegyi posted 2/11/2022 1:49:24 PM Post Details Share Post
Group: Forum Members Posts: 95, Visits: 2.3K	+x TouchTheSky - 2/11/2022 1:46:51 PM +x KeiXiD - 2/11/2022 12:50:55 PM This setting was at 12500ft so it should display targets. One more thought: did you try to enable and use "FLARM Devices" Air Avionics AT-1 as the location source? Did you set the Stratux IP to 192.168.1.1? That's what he stated in the first question. I have the same settings and I see bearingless targets sometime. Maybe there was just none within range?
	Reply Like 4
TouchTheSky	T TouchTheSky posted 2/11/2022 1:46:51 PM Post Details Share Post
T Group: Forum Members Posts: 153, Visits: 4.3K	+x KeiXiD - 2/11/2022 12:50:55 PM This setting was at 12500ft so it should display targets. One more thought: did you try to enable and use "FLARM Devices" Air Avionics AT-1 as the location source? Did you set the Stratux IP to 192.168.1.1?
	Reply Like 3
KeiXiD	K KeiXiD posted 2/11/2022 12:50:55 PM Post Details Share Post
K Group: Forum Members Posts: 4, Visits: 0	This setting was at 12500ft so it should display targets.
	Reply Like 4
TouchTheSky	T TouchTheSky posted 2/11/2022 6:47:58 AM Post Details Share Post
T Group: Forum Members Posts: 153, Visits: 4.3K	+x KeiXiD - 2/10/2022 9:48:24 PM Hello👋🏼 I have an Stratux and i would like to display bearingless targets directly in SD.I already set my IP to xxx.1.1 instead of xxx.10.1 and connected the stratux via Flarm with AirConnect to SD and the bearingless target slider in SD is on.Can anybody give me an advice? I‘m using the latest Version (eu27). You should be ready to see bearingless targets, maybe the SD traffic altitude filter prevented you from seeing any traffic.
	Reply Like 4
KeiXiD	K KeiXiD posted 2/10/2022 9:48:24 PM Post Details Share Post
K Group: Forum Members Posts: 4, Visits: 0	Hello👋🏼 I have an Stratux and i would like to display bearingless targets directly in SD. I already set my IP to xxx.1.1 instead of xxx.10.1 and connected the stratux via Flarm with AirConnect to SD and the bearingless target slider in SD is on. Can anybody give me an advice? I‘m using the latest Version (eu27).
	Reply Like 4