+x

 

Rdkraker - 10/15/2018 6:08:21 AM

Does anyone know where to find the ahrs and Baro sensor??Been told by three suppliers (via eBay, amazon and AliExpress) after being confirmed to be shipped, they were unfortunately out of stock....Now one for sale on aliexpress for 84usd!! They were 12 usd before...Anyone has a spare unit for sale?

+x

 

TouchTheSky - 10/6/2018 10:04:14 AM

+x

 

SemperFi - 10/6/2018 10:01:05 AM

+x

 

TouchTheSky - 10/5/2018 4:54:33 PM

+x

 

Rdkraker - 10/5/2018 3:52:46 PM

Have build a stratux receiver with dvbt stick and USB GPS dongle. Get location in sd, and traffic on stratux webpage.

However no traffic in sd... 

Have set vertical limits for traffic to 40000ft however nothing shows. 

Any settings I need to change? 

Do I need to switch msl alt off in stratux? 

Or do I need a barometric input on de pi? And if so, since I don't need ahrs, is there an USB dongle for that? 

- in SD under Setup>Third-Party Devices> you should select SkyEcho, iLevil

- leave the MSL switch off for SD

- for ADS-B you don't need the AHRS/Baro module

When I tried, traffic won't show without the Stratux delivering baro information to Skydemon alongside the ADS-B data, has that changed?

You may be right, nothing has changed in that respect. Therefore an AHRS/Baro module is required (and makes sense).

+x

 

SemperFi - 10/6/2018 10:01:05 AM

+x

 

TouchTheSky - 10/5/2018 4:54:33 PM

+x

 

Rdkraker - 10/5/2018 3:52:46 PM

Have build a stratux receiver with dvbt stick and USB GPS dongle. Get location in sd, and traffic on stratux webpage.

However no traffic in sd... 

Have set vertical limits for traffic to 40000ft however nothing shows. 

Any settings I need to change? 

Do I need to switch msl alt off in stratux? 

Or do I need a barometric input on de pi? And if so, since I don't need ahrs, is there an USB dongle for that? 

- in SD under Setup>Third-Party Devices> you should select SkyEcho, iLevil

- leave the MSL switch off for SD

- for ADS-B you don't need the AHRS/Baro module

When I tried, traffic won't show without the Stratux delivering baro information to Skydemon alongside the ADS-B data, has that changed?

+x

 

Rdkraker - 10/5/2018 3:52:46 PM

Have build a stratux receiver with dvbt stick and USB GPS dongle. Get location in sd, and traffic on stratux webpage.

However no traffic in sd... 

Have set vertical limits for traffic to 40000ft however nothing shows. 

Any settings I need to change? 

Do I need to switch msl alt off in stratux? 

Or do I need a barometric input on de pi? And if so, since I don't need ahrs, is there an USB dongle for that? 

+x

 

EU001939 - 9/2/2018 9:02:25 AM

has anyone found a working AHRS app for an Ipad?