+x

 

b3nn0 - 7/9/2019 1:20:56 PM

+x

 

joey - 7/9/2019 1:10:37 PM

+x

 

b3nn0 - 6/15/2019 12:41:16 PM

There is a Stratux fork for the European market that is maintained by me and a few other developers, including FLARM and some other stuff. Based on latest official Stratux.

https://github.com/b3nn0/stratux

Downloads:

https://github.com/b3nn0/stratux/releases

Thanks for pointing out this fork.

I currently own a Stratux consisting of the following components, as recommended on the stratux homepage:

• Raspberry Pi 3B Motherboard.
• Stratux 1090ES & UAT - Radios (Low Power v2+v3) and High Gain Antennas.
• GPYes/internal
• AHRS Sensor

Will this setup work to receive FLARM signals or do I have to buy a different USB radio? Asking because there is a post in this thread stating:

The v3 radio does not support FLARM at the moment since it requires a new firmware on the radio.

That is correct. The V3 radio will not work for FLARM reception for now, see also https://github.com/b3nn0/stratux/blob/master/README.md

I'm will try to get my hands on a V3 radio some time in the future and will check if I can implement it, but when and if this will be done, I can not say yet (sadly, the Stratux store does not ship to Germany any more, so getting this here is a bit more tricky - but I'm working on it).

+x

 

joey - 7/9/2019 1:10:37 PM

+x

 

b3nn0 - 6/15/2019 12:41:16 PM

There is a Stratux fork for the European market that is maintained by me and a few other developers, including FLARM and some other stuff. Based on latest official Stratux.

https://github.com/b3nn0/stratux

Downloads:

https://github.com/b3nn0/stratux/releases

Thanks for pointing out this fork.

I currently own a Stratux consisting of the following components, as recommended on the stratux homepage:

• Raspberry Pi 3B Motherboard.
• Stratux 1090ES & UAT - Radios (Low Power v2+v3) and High Gain Antennas.
• GPYes/internal
• AHRS Sensor

Will this setup work to receive FLARM signals or do I have to buy a different USB radio? Asking because there is a post in this thread stating:

The v3 radio does not support FLARM at the moment since it requires a new firmware on the radio.

+x

 

TouchTheSky - 9/24/2018 7:38:39 PM

Thanks to neubamat's observations and suggestions, a new Stratux IMG is now available here:

https://github.com/PepperJo/stratux/releases/download/v1.4r5-flarm2/stratux-v1.4r5-flarm-588304c8f5.img.zip

On the settings page there is now a GDL90 MSL Altitude Switch which by default is ON but has to be switched OFF for SkyDemon.

Happy testing.