Hello,

Gianni, we need a specific upper limit in SkyDemon for pieces of airspace, we cannot just write "lower vertical limit of above controlled airspace". We could potentially add a note, but we will wait and see.

Consider that there is no FMC area with un upper limit of FL195.
Reduce this limit for the "Automatic decluttering" as follow: Padova 5000 is an average that should work, Milano North West is under the TMA and CTA that are A class so 2500 is not exact but is acceptable, Milano North East again is under the TMA so same limits, Milano North is under CTA class D so 125 should be Ok, Roma (Sardinia) you can limit at 2500 since nobody care about FMC in that area.
But write, this is important, on "What's Here" when you tap on the screen : "Surface - Upper limit: lower vertical limit of above controlled airspace" and not "Surface - FL 195" because this is totally false.
Pilots will understand.....the important is to see the area on the map.
Is my suggestion....better than nothing and at least pilot can have an idea of the upper limits and where the FMC lateral limits are.
I leave up to you to decide the best.