Obstacles Switzerland

Important: These forums are for discussions between SkyDemon users. They are not routinely monitored by SkyDemon staff so any urgent issues should be sent directly to our Customer Support.

Obstacles Switzerland

Author	Message
Chris_LSZO	Chris_LSZO posted 8/22/2018 4:27:39 AM HOT Topic Details Share Topic
Group: Forum Members Posts: 107, Visits: 149	Hi In Switzerland we have a lot of cables and other dangerous stuff. Unfortunately Skydemon don't show some of them. Here are the official source, in this example 2 cables are visible and they are missing in Skydemon. Here you can download the *.kmz-file of all obstacles. Could you fix this please? Thank you. Chris
	Reply Like 3
Reply
Chris_LSZO	Chris_LSZO posted 8/22/2018 9:11:23 PM Post Details Share Post
Group: Forum Members Posts: 107, Visits: 149	+x Tim Dawson - 8/22/2018 4:18:36 PM We would only do this if faced with significant demand to do so. The reason why obstacles over 300ft (typical value) are excluded from enroute charts is to reduce clutter, because there are a lot of them. Is it normal to fly a helicopter less than 500ft AGL when not taking off or landing where you operate? I'm agree with you. The best way would be if you leave the choice to the user: Let him adjust the min. height from 0 to 300ft. Or just a "Helicopter-switch". Chris
	Reply Like 4

Merge into selected topic...

Merge into merge target...

Merge into a specific topic ID...

Threaded View

Obstacles Switzerland

Chris_LSZO - 8/22/2018 4:27:39 AM

It is standard in enroute aeronautical charts to include obstructions...

Tim Dawson - 8/22/2018 10:57:45 AM

Thats maybe the reason, yes. Does that mean the height of the masts or...

Chris_LSZO - 8/22/2018 11:12:30 AM

We are given a "maximum height above ground level" datapoint, where...

Tim Dawson - 8/22/2018 11:24:07 AM

Okay Tim. Could you reduce the limit to 100ft maybe? Or could you...

Chris_LSZO - 8/22/2018 11:29:58 AM

We would only do this if faced with significant demand to do so. The...

Tim Dawson - 8/22/2018 4:18:36 PM

I'm agree with you. The best way would be if you leave the choice to...

Chris_LSZO - 8/22/2018 9:11:23 PM

But then we'd still be loading all those obstacles into memory (for...

Tim Dawson - 8/28/2018 1:35:40 PM

:((

Chris_LSZO - 8/31/2018 12:54:54 PM

Hi Tim,this switch already exists in the aircraft setup menu (airframe...

Gerhard66 - 9/1/2018 2:16:32 AM

And about the memory: Maybe you can handle it like the High Resolution...

Chris_LSZO - 9/2/2018 6:25:42 PM

Sorry, it simply isn't the same. It might seem a simple thing to make...

Tim Dawson - 9/3/2018 11:06:39 AM

- 200ft are not enough with non horizontal cables - In case of an...

Chris_LSZO - 9/3/2018 12:40:47 PM

Your request has indeed been noted. Thank you.

Tim Dawson - 9/4/2018 12:17:19 PM

Post Quoted Reply

Reading This Topic

Login
Remember Me Reset Password Resend Validation Email Login