Stratux

Important: These forums are for discussions between SkyDemon users. They are not routinely monitored by SkyDemon staff so any urgent issues should be sent directly to our Customer Support.

Stratux

Author	Message
rg	rg posted 10/6/2017 4:15:37 PM Post Details Share Post
Group: Forum Members Posts: 109, Visits: 1.9K	+x neubamat - 10/6/2017 4:11:06 PM Got my MPU9250+BMP280 module today and connected it to raspberry's GPIO pins. I'm seeing traffic in SD with the latest stratux release... as expected Can you post a link to the module you purchased?
	Reply Like 39
neubamat	n neubamat posted 10/6/2017 7:00:56 PM Post Details Share Post
n Group: Forum Members Posts: 19, Visits: 18	+x rg - 10/6/2017 4:15:37 PM +x neubamat - 10/6/2017 4:11:06 PM Got my MPU9250+BMP280 module today and connected it to raspberry's GPIO pins. I'm seeing traffic in SD with the latest stratux release... as expected Can you post a link to the module you purchased? ‌Yes, it's a MPU9250 BMP280 10DOF. I bought it from a local/german seller, but the linked one looks exactly like mine. Mapping to raspberry pins (fsync isn't required/available): ‌3‌V3 ‌- pin 1 GND - pin 6 S‌CL - pin 5 SDA - pin 3 More info: All About AHRS - Stratux Wiki
	Reply Like 40
Telefisch	T Telefisch posted 10/21/2017 3:53:34 PM Post Details Share Post
T Group: Forum Members Posts: 6, Visits: 0	Hello, I also tried the MPU9250-BMP280 Module. On stratux page, I got traffic, GPS and AHRS Data. In SD I couldn‘t See anything. Connected via GDL90 and got position from stratux but no traffic. Under menu traffic, I only have a black background with a thin red cross. Any ideas?
	Reply Like 32
neubamat	n neubamat posted 10/23/2017 4:44:50 PM Post Details Share Post
n Group: Forum Members Posts: 19, Visits: 18	+x Telefisch - 10/21/2017 3:53:34 PM Hello, I also tried the MPU9250-BMP280 Module. On stratux page, I got traffic, GPS and AHRS Data. In SD I couldn‘t See anything. Connected via GDL90 and got position from stratux but no traffic. Under menu traffic, I only have a black background with a thin red cross. Any ideas? Try Setup - Navigation Options - Other Traffic and increase "Show Within Vertically" threshold. SD filters irrelevant traffic to declutter your map.
	Reply Like 37
Viscab	V Viscab posted 10/29/2017 7:31:19 PM Post Details Share Post
V Group: Forum Members Posts: 1, Visits: 1	I would love if this thread could be kept alive, I'm considering building a stratux with ahrs myself, and would love if it got integrated in to skydemon
	Reply Like 38
Telefisch	T Telefisch posted 10/30/2017 10:12:16 AM Post Details Share Post
T Group: Forum Members Posts: 6, Visits: 0	+x neubamat - 10/23/2017 4:44:50 PM Try Setup - Navigation Options - Other Traffic and increase "Show Within Vertically" threshold. SD filters irrelevant traffic to declutter your map. Thanks for that Tip, I‌'ll give it a try, next time the weather will let me fly.
	Reply Like 44
Telefisch	T Telefisch posted 11/7/2017 1:01:45 PM Post Details Share Post
T Group: Forum Members Posts: 6, Visits: 0	+x Telefisch - 10/30/2017 10:12:16 AM +x neubamat - 10/23/2017 4:44:50 PM Try Setup - Navigation Options - Other Traffic and increase "Show Within Vertically" threshold. SD filters irrelevant traffic to declutter your map. Thanks for that Tip, I‌'ll give it a try, next time the weather will let me fly. Ok, meanwhile I went flying and was a bit disappointed. I‌ thought, that perhaps I could see Mode-S Transmitters but that was a fault. E‌ven a SAR-helicopter in AD-Pattern wasn't visible in Stratux / SD so I think it is useless weight here in germany.
	Reply Like 41
rg	rg posted 11/7/2017 1:35:31 PM Post Details Share Post
Group: Forum Members Posts: 109, Visits: 1.9K	Have you installed the latest stratux software? And if so have you got the ahrs chip (which includes the baro sensor)? If no baro sensor you’ll not see traffic in SkyDemon unless you downgrade stratux software to 1.2 but you should see the traffic on the stratux web page.
	Reply Like 36
Telefisch	T Telefisch posted 11/7/2017 4:42:01 PM Post Details Share Post
T Group: Forum Members Posts: 6, Visits: 0	Yes, I have installed the MPU9250-BMP280. If Software is at latest version, I need to check. But as I know by now, most Transponders do obviously not send position signals.
	Reply Like 36
Tim Dawson	Tim Dawson posted 11/8/2017 11:40:15 AM Post Details Share Post
Group: Forum Members Posts: 8K, Visits: 9K	If you were expecting an ADS-B receiver to somehow show plain mode C/S data then your expectations were at fault. It'll be better in the future, though - as long as everybody equips with ADS-B out equipment, which is certainly the future of electronic conspicuity.
	Reply Like 38