Hi Tim,

Ever since the latest SD update where the connection to PF was moved from CONNECTIONS to GO FLYING, I can't get my PF Core to connect to SD and I have to revert to Use Location Services and the iPad's internal GPS.

I have checked the PF Core device and get the customary orange LED for 20 seconds and then the steady green LED which tells me that it has booted correctly and is receiving GPS signals. On the iPad wi-fi status icon, it shows that I am connected to the Butterfly Connect.

I have confirmed SETTINGS - CONNECTIVITY - FLARM and when I select GO FLYING - USE FLARM, I get the message: "Please wait while a connection is established to your external device" but after about 10 seconds I always get the message: "Failed to establish a connection with Butterfly Connect."

I have tried it with airplane mode off (wi-fi still selected) and on; I have deleted SD from my iPad and reloaded it; I have reconfigured the PF Core with my USB stick but all to no avail. My iPad is connected to the Butterfly Connect wi-fi and the PF Core is receiving GPS data but it's just not happening on SD and only seems to have started after the last update.

Do you have any suggestions, please?

Paul

Hi Folks,
As a quick test for connectivity, you should be able to run a 'telnet' session directly from your iOS device to the butterfly connect.
There is an APP on iOS called 'Telnet Lite', you could configure a telnet connection providing the following (depending on version of butterfly)

IP-ADDR: 192.168.1.1
IP-PORT: 2000

When you connect this, you can enter your PIN code, if all is well, you should then see the messages streamed to the application terminal

Thx
Lee