Hi Tim,

Please find enclosed a couple of screenshots of contacts that have shown up on my 10" inch iPad running SD after being detected by my aircraft's PF Core. I'm not sure that they show fine detail but you can probably see that the Flarm contact (a glider) has almost totally illegible distance and height info due to the font size. Similarly, the transponder equipped contact is shown by white ring (I.e it was non- threatening) but agin, the distance info is just too small to be read. If it wasn't for the optional audio licence I have with my PF Core, I probably wouldn't have noticed the Flarm contact.

Is there any way the font size can be made bigger please? If you would like the pics to be sent to you via email, please let me know. Thanks.

Paul

Please send us screenshots by email (support at skydemon.aero) so we can accurately judge the actual physical size of the text you have seen.

SO i connected my brand new Airconnect today, its the new version that does not come with a pin code, so what should i have in the pin code row in SD?

So problem is i cant connect it just chews and gives me error.

ok so i found this document and punched in pin code 6074 and it works, totaly unreasonable.

The new Air Connect uses protected WiFi and therefore no PIN in the app is required any more. However I am afraid the app needs a random key, e.g. "0000" or any other key. Then it should work.

• 0000: 192.168.0.14:100
  
• 4500: 169.254.1.1:2000
  
• 5000: 1.2.3.4:2000
  
• 5500: 192.168.1.1:2000

Riccardo Bertolini (AIR Avionics)
3. Sep., 07:43 CEST
Dear Dennis 
thank you for your message.
use the pin 5555 or higher.
We are always happy to help if you have more questions.
Kind regards
Riccardo Bertolini

Seems to me that neither Power Flarm nor Sky Demon is the problem but your Air Connect, which occasionally sends out spurious signals and is, therefore, rejected by SD during its checks that the data is valid. Why should Tim have to deal with 'garbage in' when other connections don't have the same problem?