# RS-232 data port 2

# TITLE: RS-232 data port 2 Flarm Traffic
# DESC: Activates or deactivates the output of Flarm traffic for this data
# DESC: interface.
# VALUES: ON, OFF
# DEFAULT: ON
FLARMTRAFFIC2=ON

# TITLE: RS-232 data port 2 ADS-B Traffic
# DESC: Activates or deactivates the output of ADS-B traffic for this data
# DESC: interface.
# VALUES: ON, OFF
# DEFAULT: ON
ADSBTRAFFIC2=ON

# TITLE: RS-232 data port 2 Range [m]
# DESC: Horizontal range limit. Targets outside of this range are not transmitted
# DESC: over this data output.
# VALUES: integer value, 0 - 1000000
# DEFAULT: 25000
RANGE2=25000

# TITLE: RS-232 data port 2 Vertical Range [m]
# DESC: Vertical range limit. Targets outside of this vertical range (differential
# DESC: altitude) are not transmitted over this data output.
# VALUES: integer value, 0 - 1000000
# DEFAULT: 1000
VRANGE2=1000

# TITLE: RS-232 data port 2 Non-Bearing Range [m]
# DESC: Horizontal range limit. Non-bearing targets outside of this range are not
# DESC: transmitted over this data output.
# VALUES: integer value, 0 - 1000000
# DEFAULT: 3000
MODESRANGE2=3000

# TITLE: RS-232 data port 2 Non-Bearing Vertical Range [m]
# DESC: Vertical range limit. Non-bearing targets outside of this range are not
# DESC: transmitted over this data output.
# VALUES: integer value, 0 - 1000000
# DEFAULT: 500
MODESVRANGE2=500

# TITLE: RS-232 data port 2 Protocol
# DESC: Selects the data protocol for this data interface.
# VALUES: NMEA, GARMINTIS, GDL90, ABSTXT
# DEFAULT: NMEA
PROTOCOL2=NMEA

# TITLE: RS-232 data port 2 RS-232 Data Rate
# DESC: Selects the RS-232 data rate (baud rate) for the RS-232 data port 2.
# VALUES: 4800, 9600, 19200, 28800, 38400, 57600, 115200
# DEFAULT: 19200
BAUD2=9600

# TITLE: RS-232 data port 2 GPRMC
# DESC: Activates the output of the $GPRMC dataset. GPRMC is a GPS dataset.
# VALUES: ON, OFF
# DEFAULT: ON
NMEAGPRMC2=ON

# TITLE: RS-232 data port 2 GPGGA
# DESC: Activates the output of the $GPGGA dataset. GPGGA is a GPS dataset.
# VALUES: ON, OFF
# DEFAULT: ON
NMEAGPGGA2=ON

# TITLE: RS-232 data port 2 GPGSA
# DESC: Activates the output of the $GPGSA dataset. GPGSA is a GPS dataset.
# VALUES: ON, OFF
# DEFAULT: ON
NMEAGPGSA2=ON

# TITLE: RS-232 data port 2 PGRMZ
# DESC: Activates the output of the $PGRMZ dataset. PGRMZ is a dataset for
# DESC: pressure altitude.
# VALUES: ON, OFF
# DEFAULT: ON
NMEAPGRMZ2=ON

# TITLE: RS-232 data port 2 PFLAU
# DESC: Activates the output of the $PFLAU dataset. PFLAU is a warning dataset in
# DESC: the FLARM data protocol.
# VALUES: ON, OFF
# DEFAULT: ON
NMEAPFLAU2=ON

# TITLE: RS-232 data port 2 PFLAA
# DESC: Activates the output of the $PFLAA dataset. PFLAA is a traffic information
# DESC: dataset in the FLARM data protocol.
# VALUES: ON, OFF
# DEFAULT: ON
NMEAPFLAA2=ON

# TITLE: RS-232 data port 2 PFLAO
# DESC: Activates the output of the $PFLAO dataset. PFLAO is an alert zone info
# DESC: dataset in the FLARM data protocol.
# VALUES: ON, OFF
# DEFAULT: ON
NMEAPFLAO2=ON

# TITLE: RS-232 data port 2 PFLAQ
# DESC: Activates the output of the $PFLAQ dataset. PFLAQ is a progress
# DESC: information dataset in the FLARM data protocol.
# VALUES: ON, OFF
# DEFAULT: ON
NMEAPFLAQ2=ON

# TITLE: RS-232 data port 2 PFLAE
# DESC: Activates the output of the $PFLAE dataset. PFLAE is a failure/error
# DESC: annunciation dataset in the FLARM data protocol.
# VALUES: ON, OFF
# DEFAULT: ON
NMEAPFLAE2=ON

# TITLE: RS-232 data port 2 PFLAN
# DESC: Activates the output of the $PFLAN dataset. PFLAN is a CARP range analyzer
# DESC: dataset in the FLARM data protocol.
# VALUES: ON, OFF
# DEFAULT: OFF
NMEAPFLAN2=ON

# TITLE: RS-232 data port 2 PFLAM
# DESC: Activates the output of the $PFLAM dataset. PFLAM is a messaging dataset
# DESC: in the FLARM data protocol.
# VALUES: ON, OFF
# DEFAULT: OFF
NMEAPFLAM2=ON

# TITLE: RS-232 data port 2 PAAVQ
# DESC: Activates the output of the $PAAVQ dataset. PAAVQ is a progress
# DESC: information dataset in the AAV data protocol.
# VALUES: ON, OFF
# DEFAULT: OFF
NMEAPAAVQ2=OFF

# TITLE: RS-232 data port 2 PAAVE
# DESC: Activates the output of the $PAAVE dataset. PAAVE is an error dataset in
# DESC: the AAV data protocol.
# VALUES: ON, OFF
# DEFAULT: OFF
NMEAPAAVE2=OFF

# TITLE: RS-232 data port 2 PAAVS
# DESC: Activates the output of the $PAAVS dataset. PAAVS is an status dataset in
# DESC: the AAV data protocol.
# VALUES: ON, OFF
# DEFAULT: OFF
NMEAPAAVS2=OFF

# TITLE: RS-232 data port 2 GDL90
# DESC: Activates the output of the $GDL90 dataset. This is an NMEA dataset
# DESC: encapsulating the GDL90 data protocol.
# VALUES: ON, OFF
# DEFAULT: OFF
NMEAGDL902=OFF

# TITLE: RS-232 data port 2 PFLAU ID
# DESC: Appends an identification data field to warning datasets in the FLARM data
# DESC: protocol.
# VALUES: ON, OFF
# DEFAULT: ON
NMEAPFLAUID2=ON

# TITLE: RS-232 data port 2 PFLAU Non-Bearing Targets
# DESC: Selects how traffic warnings from non-bearing targets are transmitted over
# DESC: the data interface. 'Empty Bearing Field' is recommended. Only set to
# DESC: 'Rotate Bearing' if the connected traffic display on this interface does
# DESC: not support datasets with empty bearing data fields.
# VALUES: OFF, EMPTYBRG, ROTATE
# DEFAULT: OFF
NMEAPFLAUNONDIR2=OFF

# TITLE: RS-232 data port 2 PFLAU Alert Zones
# DESC: Activates warnings from FLARM alert zones.
# VALUES: ON, OFF
# DEFAULT: ON
NMEAPFLAUZONES2=ON

# TITLE: RS-232 data port 2 PFLAU Advisory Alerts
# DESC: Activates FLARM Advisory Alerts. Advisory Alerts (also referred to as
# DESC: 'Info Alerts') are short traffic warning messages indicating that a target
# DESC: has been received for the first time within the vicinity of the own
# DESC: aircraft.
# VALUES: ON, OFF
# DEFAULT: ON
NMEAPFLAUADVISORY2=ON

# TITLE: RS-232 data port 2 PFLAA Non-Bearing Targets
# DESC: Activates data output of 'non-bearing targets' in PFLAA datasets. This is
# DESC: recommended if the connected traffic display on this interface does
# DESC: explicitly support such datasets.
# VALUES: ON, OFF
# DEFAULT: ON
NMEAPFLAAMODES2=ON

# TITLE: RS-232 data port 2 PFLAA No-Track Flag Output
# DESC: Activates the data output of the FLARM no-track status flag in all PFLAA
# DESC: datasets.
# VALUES: ON, OFF
# DEFAULT: ON
NMEAPFLAANOTRACK2=ON

# TITLE: RS-232 data port 2 PFLAE Error Messages
# DESC: Activates the output of error messages within the $PFLAE dataset. In
# DESC: addition to the error itself, an error message is transmitted over the
# DESC: data port.
# VALUES: ON, OFF
# DEFAULT: ON
NMEAPFLAEMSG2=ON

# TITLE: RS-232 data port 2 GDL90 Send Own MSL Altitude
# DESC: The GDL90 protocol description specifies an output of the ownship GPS
# DESC: altitude, relative to the WGS-84 ellipsoid. The output can be changed to
# DESC: be relative to MSL, by activating this setting.
# VALUES: ON, OFF
# DEFAULT: OFF
GDL90SENDMSLALT2=OFF