Login
Register
Login
Register
Back to SkyDemon Website
Important:
These forums are for discussions between SkyDemon users. They are not routinely monitored by SkyDemon staff so any urgent issues should be sent directly to our
Customer Support
.
Home
»
Discussion Forums
»
SkyDemon Navigation
»
Disconnections while using SD with Stratux in Flarm mode
Disconnections while using SD with Stratux in Flarm mode
Post Reply
Like
6
Disconnections while using SD with Stratux in Flarm mode
View
Flat Ascending
Flat Descending
Threaded
Options
Subscribe to topic
Print This Topic
RSS Feed
Goto Topics Forum
Author
Message
matthiasdols
m
matthiasdols
posted 10/3/2023 4:54:15 PM
ANSWER
Topic Details
Share Topic
m
Group: Forum Members
Posts: 2,
Visits: 1
I use Skydemon together with a Stratux in the version 1.6r1-eu028 (32d5e58b7f) to receive the traffic and the GPS-Signal of the Stratux. When I start the flying mode in Skydemon and use the option ""Use Flarm with Air Connect" I have problems with my connection to the Wifi, which means, that I receive the error message "Reconnecting to device" by Skydemon, sometimes one time in a minute. This error message doesn't occur when I use the option "Use GDL90 Compatible Device". Does anyone know the reason for those errors and what can be done to avoid having such disconnections in Flaum-Mode?
Any help would be much appreciated.
Reply
Like
6
Reply
kyza
k
kyza
posted 11/5/2023 10:23:17 AM
ANSWER
Post Details
Share Post
k
Group: Forum Members
Posts: 3,
Visits: 0
Hello. We have similar problem.
We have Power Flarm connected to USR-W610 through RS 232. Than we have iPad connected to wifi (USR-W610) where SkyDemon is running.
Continuously we loosing connection on SkyDemon to PowerFlarm. Lets say every 15-30 seconds SkyDemon says lost connection re-authenticating. We can see all ADSB and FLARM traffic on SkyDemon without problem. But that reconnections are annoying.
We checked that ping from iPad to wifi is stable so we think the problem is within SkyDemon.
It seems to me that this problem started after last update aprox. month ago.
Version we have is 3.16.10.
Can someoen help us ? 🙂 Thank you in Advance.
Reply
Like
1
GO
Merge Selected
Merge into selected topic...
Merge into merge target...
Merge into a specific topic ID...
Open Merge
Threaded View
Threaded View
Disconnections while using SD with Stratux in Flarm mode
matthiasdols
-
10/3/2023 4:54:15 PM
Hello. We have similar problem. We have Power Flarm connected to...
kyza
-
11/5/2023 10:23:17 AM
This is very likely the same issue that has already been reported in...
TouchTheSky
-
11/5/2023 1:25:55 PM
Thank you for info. Kyza
kyza
-
11/5/2023 2:03:05 PM
Post Reply
Like
6
Post Quoted Reply
Reading This Topic
Login
Login
Remember Me
Reset Password
Resend Validation Email
Login
Explore
Messages
Mentions
Search