Important: These forums are for discussions between SkyDemon users. They are not routinely monitored by SkyDemon staff so any urgent issues should be sent directly to our Customer Support.

PilotAware and simultaneous GPRS Connection


Author
Message
BoNeHeAd
BoNeHeAd
Too Much Forum (244 reputation)Too Much Forum (244 reputation)Too Much Forum (244 reputation)Too Much Forum (244 reputation)Too Much Forum (244 reputation)Too Much Forum (244 reputation)Too Much Forum (244 reputation)Too Much Forum (244 reputation)Too Much Forum (244 reputation)
Group: Forum Members
Posts: 2, Visits: 53
Hi all. Sorry if this has been asked.. a search didn't turn up any results.

‌‌I use SkyDemon and an iPad Pro in the cockpit, connected via wifi to PilotAware. Both fantastic products.

Currently, I just update SD before I head out to the aircraft so live data is then turned off to avoid the nagging connection issues. But what I would like to do is drop a sim card into my iPad and actually use live data while in flight.

So the question is, does anyone have experience with this setup? Can the iPad gather live data via GPRS while connected by wifi to the Pilotaware? Or will it be trying to get data ONLY from the wifi connection and therefore report no connection?

T‌‌hanks in advance.

/‌BoNeHeAd
Replies
Tony N
Tony N
Too Much Forum (19K reputation)Too Much Forum (19K reputation)Too Much Forum (19K reputation)Too Much Forum (19K reputation)Too Much Forum (19K reputation)Too Much Forum (19K reputation)Too Much Forum (19K reputation)Too Much Forum (19K reputation)Too Much Forum (19K reputation)
Group: Forum Members
Posts: 343, Visits: 2.5K
Easy Cruising - 7/3/2023 7:16:25 PM
I know this a very old thread, but does anyonme have any experience of this ? My Samsung Galaxy S22+ also couldn't use mobile data when connected to Pilotaware or Dynon Skyview. The 'Intelligent Wi-Fi' option also didn't help. Using speedify does work, but you have to pay for it. Does anyone have experience of either (1) Making it work in Android without using a 3rd party app, or (2) Using a genuinely free app rather than speedify ?

Any info. appreciated because it's rather useful to get the weather etc in-flight without having to disconnect from the external gps source.

This may or may not be helpful. I also use a Samsung S22+ for SkyDemon, but don't have PilotAware; I use a SkyEcho 2.
I can get mobile data when flying (proved by getting SD real-time wind speed and direction and METAR updates).
The one thing I do is to select "Go Flying" in SD before turning on my SE2. This always assures that mobile data connects properly.
I never used to do this (I used to powered up SE2 before selecting "Go Flying) but noticed on a few occasions that I didn't get a mobile data connection.
Maybe something to try with your setup?
Tony

Easy Cruising
Easy Cruising
Too Much Forum (4.8K reputation)Too Much Forum (4.8K reputation)Too Much Forum (4.8K reputation)Too Much Forum (4.8K reputation)Too Much Forum (4.8K reputation)Too Much Forum (4.8K reputation)Too Much Forum (4.8K reputation)Too Much Forum (4.8K reputation)Too Much Forum (4.8K reputation)
Group: Forum Members
Posts: 50, Visits: 39
Tony N - 7/4/2023 10:26:09 AM
Easy Cruising - 7/3/2023 7:16:25 PM
I know this a very old thread, but does anyonme have any experience of this ? My Samsung Galaxy S22+ also couldn't use mobile data when connected to Pilotaware or Dynon Skyview. The 'Intelligent Wi-Fi' option also didn't help. Using speedify does work, but you have to pay for it. Does anyone have experience of either (1) Making it work in Android without using a 3rd party app, or (2) Using a genuinely free app rather than speedify ?

Any info. appreciated because it's rather useful to get the weather etc in-flight without having to disconnect from the external gps source.

This may or may not be helpful. I also use a Samsung S22+ for SkyDemon, but don't have PilotAware; I use a SkyEcho 2.
I can get mobile data when flying (proved by getting SD real-time wind speed and direction and METAR updates).
The one thing I do is to select "Go Flying" in SD before turning on my SE2. This always assures that mobile data connects properly.
I never used to do this (I used to powered up SE2 before selecting "Go Flying) but noticed on a few occasions that I didn't get a mobile data connection.
Maybe something to try with your setup?
Tony

Worth a try. Thx. Still think there must be a cleaner way to do it though.

GO

Merge Selected

Merge into selected topic...



Merge into merge target...



Merge into a specific topic ID...





Reading This Topic

Login

Explore
Messages
Mentions
Search