Important: These forums are for discussions between SkyDemon users. They are not routinely monitored by SkyDemon staff so any urgent issues should be sent directly to our Customer Support.

Route Export to GARMIN 660 devices


Author
Message
Mike Stueber
Mike Stueber
Too Much Forum (2.1K reputation)Too Much Forum (2.1K reputation)Too Much Forum (2.1K reputation)Too Much Forum (2.1K reputation)Too Much Forum (2.1K reputation)Too Much Forum (2.1K reputation)Too Much Forum (2.1K reputation)Too Much Forum (2.1K reputation)Too Much Forum (2.1K reputation)
Group: Forum Members
Posts: 54, Visits: 193

Now it’spossible to export direct flight plans to GARMIN Pilot.

It's possible to connect the ipad via Bluetooth with the Garmin 660 device.

It would be very helpful to export planned routes to the Garmin 660 also.

I don't understand why it's not possible.

Garmin Pilot and Garmin 660 GPS are both from GARMIN .

Perhaps it would be possible to ask the guys from Garmin to get this feature.



Reply
gflyer
g
Forum Member (29 reputation)Forum Member (29 reputation)Forum Member (29 reputation)Forum Member (29 reputation)Forum Member (29 reputation)Forum Member (29 reputation)Forum Member (29 reputation)Forum Member (29 reputation)Forum Member (29 reputation)
Group: Forum Members
Posts: 7, Visits: 0
May this information helps, I found on the Vans Forum about area 660.

2- Does the 660 "connext" with other Garmin apps like FltPlan Go?

Quick note to confirm I had no trouble exchanging flight plans (in either direction) between FltPlan Go on my iPad and the Aera 660 using the Connext feature. You connect the two devices via Bluetooth ... then within the FltPlan Go app you select Garmin as the External Device. Only flight plans are exchanged between the devices. There was some reference in an earlier post asking where / or if a Stratux receiver fits into the mix (I use one myself). That still requires a separate WiFi connection between the iPad / FltPlan Go and Stratux; ADS-B data does not flow to the Aera even with Connext active between the two. I gather from the Stratux development boards Garmin has recently opened some of their protocols; fingers crossed we may see that in the future.


GO

Merge Selected

Merge into selected topic...



Merge into merge target...



Merge into a specific topic ID...




Threaded View
Threaded View
Mike Stueber - 9/3/2019 10:50:21 AM
Tim Dawson - 9/5/2019 4:13:13 PM
Mike Stueber - 9/6/2019 9:52:21 AM
Tim Dawson - 9/10/2019 1:50:05 PM
Mike Stueber - 9/13/2019 5:58:45 PM
Mike Stueber - 9/23/2019 12:09:18 PM
Mike Stueber - 5/27/2022 10:52:55 AM
Tim Dawson - 9/24/2019 10:05:43 AM
Mike Stueber - 9/25/2019 12:48:57 PM
Mike Stueber - 9/30/2019 9:44:02 AM
Tim Dawson - 9/30/2019 10:14:27 AM
wyullg - 12/10/2019 3:17:45 AM
Tim Dawson - 12/10/2019 11:38:58 AM
gflyer - 1/24/2022 9:29:38 AM
Raphael_A - 1/26/2022 7:42:51 AM
gflyer - 1/26/2022 8:14:58 AM
Tim Dawson - 1/26/2022 10:27:40 AM
gflyer - 1/26/2022 12:02:21 PM
Tim Dawson - 1/27/2022 10:15:53 AM
             Any contact?
gflyer - 1/28/2022 11:10:11 AM
Tim Dawson - 1/31/2022 10:19:37 AM
gflyer - 2/9/2022 9:10:22 PM
gflyer - 2/2/2022 5:29:40 PM
Marc25 - 2/7/2022 9:17:56 AM
Tim Dawson - 2/3/2022 11:58:23 AM
Tim Dawson - 2/17/2022 12:26:29 PM
             I wrote to Steve from Garmin. Will see.
gflyer - 2/18/2022 11:18:53 PM
WiltshireMike - 5/25/2022 8:47:59 PM
WiltshireMike - 5/27/2022 9:04:40 PM
WiltshireMike - 6/30/2022 1:52:51 PM
WiltshireMike - 6/30/2022 4:33:59 PM
Tim Dawson - 7/1/2022 12:00:36 PM
WiltshireMike - 7/5/2022 9:26:02 PM

Reading This Topic

Login

Explore
Messages
Mentions
Search