CTA Frequencies

Important: These forums are for discussions between SkyDemon users. They are not routinely monitored by SkyDemon staff so any urgent issues should be sent directly to our Customer Support.

CTA Frequencies

Author	Message
Lozzi	L Lozzi posted 4/22/2021 10:16:14 AM Topic Details Share Topic
L Group: Forum Members Posts: 9, Visits: 20	Hi everybody, I was wondering why the CTA radio frequency is not reported. In the picture below (located in the north-east of Italy) my route includes Padova CTA Zone 21 and 20, both Class D space. ATS responsible unit is Padova ACC (119.175 approach control / 120.725 area control). Why there’s no frequency indication? I can neither find it in the briefing pack. Thanks. Andrea.
	Reply Like 4
Replies
Tim Dawson	Tim Dawson posted 4/22/2021 2:57:34 PM Post Details Share Post
Group: Forum Members Posts: 8.2K, Visits: 9.7K	If the unit is a Control callsign, that sounds like it's area control for IFR flight. Would that be correct? SkyDemon only usually lists a frequency next to a piece of airspace if the AIP lists one for transits.
	Reply Like 4
Lozzi	L Lozzi posted 4/22/2021 7:08:58 PM Post Details Share Post
L Group: Forum Members Posts: 9, Visits: 20	+x Tim Dawson - 4/22/2021 2:57:34 PM If the unit is a Control callsign, that sounds like it's area control for IFR flight. Would that be correct? SkyDemon only usually lists a frequency next to a piece of airspace if the AIP lists one for transits. I'm not sure I get your point, Tim, but Padova CTA is VFR/IFR space (as for Class D rules). AIP states that you shall get clearance from FIC (126.425), then contact ACC (120.725). ACC controls VFR/IFR traffic inside CTA: So, as a VFR traffic, I should know the CTA frequency(es) to contact. Am I right? Andrea
	Reply Like 4