current maps?

Important: These forums are for discussions between SkyDemon users. They are not routinely monitored by SkyDemon staff so any urgent issues should be sent directly to our Customer Support.

current maps?

Author	Message
siggi	s siggi posted 7/2/2020 10:51:14 AM HOT Topic Details Share Topic
s Group: Forum Members Posts: 14, Visits: 0	Hello, did i get current maps in the subscription? FIR Switzerland ends north of EDTS. In the current map, Langen FIR is located far south of EDTD. This has not been the case for several years. When can I expect an update? Regards Siggi
	Reply Like 5
Replies
siggi	s siggi posted 7/3/2020 7:15:08 AM Post Details Share Post
s Group: Forum Members Posts: 14, Visits: 0	ok, I've attached 2 pictures. 1 x the Std ICAO card, in which the border between FIR Switzerland and FIR Langen is shown in green. (between my red lines). This is definitely correct because Zurich reminded me on the edge. And I miss this in SkyDemon. Which runs much more south and is wrong. I would like it to be displayed as "bold". In Skydemon I have to search intensively for them.
	Reply Like 5
grahamb	grahamb posted 7/3/2020 7:37:03 AM Post Details Share Post
Group: Forum Members Posts: 594, Visits: 29K	+x siggi - 7/3/2020 7:15:08 AM ok, I've attached 2 pictures. 1 x the Std ICAO card, in which the border between FIR Switzerland and FIR Langen is shown in green. (between my red lines). This is definitely correct because Zurich reminded me on the edge. And I miss this in SkyDemon. Which runs much more south and is wrong. I would like it to be displayed as "bold". In Skydemon I have to search intensively for them. You are still confusing FIR boundaries with FIS boundaries. The two are not the same. SkyDemon does not show FIS boundaries on the main chart, but does on the Virtual Radar view when navigating. You can test this in simulation mode.
	Reply Like 5
pilot-byom	p pilot-byom posted 7/3/2020 8:03:21 AM Post Details Share Post
p Group: Forum Members Posts: 323, Visits: 388	+x grahamb - 7/3/2020 7:37:03 AM +x siggi - 7/3/2020 7:15:08 AM ok, I've attached 2 pictures. 1 x the Std ICAO card, in which the border between FIR Switzerland and FIR Langen is shown in green. (between my red lines). This is definitely correct because Zurich reminded me on the edge. And I miss this in SkyDemon. Which runs much more south and is wrong. I would like it to be displayed as "bold". In Skydemon I have to search intensively for them. You are still confusing FIR boundaries with FIS boundaries. The two are not the same. SkyDemon does not show FIS boundaries on the main chart, but does on the Virtual Radar view when navigating. You can test this in simulation mode. Thanks for the clarification, so I get the switch location in virtual radar, which is fine for me. I don't remember this from last time, maybe it has changed with the last changes in Swiss airspace around Zurich? It is a bit confusing and awkward with Flight Information Services by Zurich FIS within the boundaries of Langen FIR though. Maybe Skydemon can add the FIS boundary on the map as well? Edited 7/3/2020 8:35:12 AM by MarkusM
	Reply Like 4