+x emporer - 11/14/2019 11:55:16 PMSince we touched the topic of ambiguity there is another suggestion:The white line extending from the airplane has 3 tic-marks. Sometimes I can't recall if I defined it as time or distance line. So I propose the following :Add the symbol d=distance or t=time at the white line with a circle around it,depending on the configuration in setup.When Tapping the circle the tic-mark revert to either time or distance markings with proper scaling and t/d-letter.In flight, sometimes I prefer to quickly change between time and distance and going in the setup menu is cumbersome.How do the others feel about this?
+x Sky Painter - 11/15/2019 1:18:58 PM+x emporer - 11/14/2019 11:55:16 PMSince we touched the topic of ambiguity there is another suggestion:The white line extending from the airplane has 3 tic-marks. Sometimes I can't recall if I defined it as time or distance line. So I propose the following :Add the symbol d=distance or t=time at the white line with a circle around it,depending on the configuration in setup.When Tapping the circle the tic-mark revert to either time or distance markings with proper scaling and t/d-letter.In flight, sometimes I prefer to quickly change between time and distance and going in the setup menu is cumbersome.How do the others feel about this?As has already been pointed out, this has been discussed in some detail previously, and since there was no consensus, the suggestion never so the light of day. I have my Aircraft Trajectory Display set to 'time' permanently, but I must admit that there have been occasions when I would like to have had the ability to be able to toggle it between time and distance and back again with one touch. If the suggestion were to be implemented, since the last tick is already effectively a 'T' this configuration should represent 'time' and when toggled to 'distance' the last tick should change, for example, to an arrow head, or circle maybe.