|
Sky Painter
|
|
|
Group: Forum Members
Posts: 626,
Visits: 15K
|
+xI must be confused, because we haven't changed any behaviour in this area for at least a year or two. It's the way it has always worked. It's quite simple really. With "Automatically Show Georeferenced Plates" enabled and prior to the introduction of SD vectored mapping of airfields in the base map, my Pooley's georeferenced plates were shown overlaid as expected. Since the introduction of SD vectored mapping of airfields in the base map, my Pooley's georeferenced plates are no longer displayed. I would simply like the former functionality restored. That is to say, with "Automatically Show Georeferenced Plates" enabled I expect my Pooley's georeferenced plates to be displayed, over riding SD's built-in vector mapping. Georeferenced VAC's are automatically displayed, so why not Pooley's plates? Essentially, there is no difference. Both sets of charts are georeferenced, but for some reason, it appears that Pooley's plates being discriminated against!
I appreciate that the status quo has probably been in place for quite a while, but I have only raised this now, because I was getting increasingly frustrated with having to manually overlay my Pooley's plates when "Automatically Show Georeferenced Plates" is enabled and it not happening!
Mike _________________________________________ Samsung Galaxy Tab A8 – Android 11.0 & SD 4.0.2.0 Huawei P30 – Android 11.0 & SD 4.0.2.0
PC – Windows 10 (Home Ed) Version 22H2, Build 19045.5737, SD 4.0.2.0
|
|
|
|
|
Tim Dawson
|
|
|
Group: Forum Members
Posts: 8.1K,
Visits: 9.2K
|
Your feedback has been noted.
We only introduced the "Automatically Show Georeferenced Plates" button to allow people to STOP the automatic display of georeferenced plates. Before, it was set to true all the time. And the behaviour you're seeing with airfield diagrams (from any publisher) was the same.
|
|
|
|
|
Renzo
|
|
|
Group: Forum Members
Posts: 55,
Visits: 120
|
+xYour feedback has been noted.
We only introduced the "Automatically Show Georeferenced Plates" button to allow people to STOP the automatic display of georeferenced plates. Before, it was set to true all the time. And the behaviour you're seeing with airfield diagrams (from any publisher) was the same. Hi Tim and Sky Painter,
I just dropped a new topic concerning that, I think - not knowing that you´re discussing this already (as far I can see the point in this topic. See here what I wrote a few minutes before: http://forums.skydemon.aero/Topic30074.aspx
In my opinion it is quite the same subject. The airfield(s) I refer to are EDML and LOWS. Both have also vector-based taxiways etc.
Thanks for reading, Renzo
|
|
|
|
|
Sky Painter
|
|
|
Group: Forum Members
Posts: 626,
Visits: 15K
|
+xYour feedback has been noted.
We only introduced the "Automatically Show Georeferenced Plates" button to allow people to STOP the automatic display of georeferenced plates. Before, it was set to true all the time. And the behaviour you're seeing with airfield diagrams (from any publisher) was the same. Hi Tim
I am disappointed to note that after all this time, this issue has still not been addressed. Do I have any hope at all that it will be addressed in the near future, or am I on a hiding to nothing?
Mike _________________________________________ Samsung Galaxy Tab A8 – Android 11.0 & SD 4.0.2.0 Huawei P30 – Android 11.0 & SD 4.0.2.0
PC – Windows 10 (Home Ed) Version 22H2, Build 19045.5737, SD 4.0.2.0
|
|
|
|
|
Tim Dawson
|
|
|
Group: Forum Members
Posts: 8.1K,
Visits: 9.2K
|
We've no plans to change this behaviour, due to reasons already explained earlier in this thread.
|
|
|
|
|
Sky Painter
|
|
|
Group: Forum Members
Posts: 626,
Visits: 15K
|
+xWe've no plans to change this behaviour, due to reasons already explained earlier in this thread. So what's the point of having an option to "Automatically display georeferenced charts" when it doesn't behave as one would expect!!!
Mike _________________________________________ Samsung Galaxy Tab A8 – Android 11.0 & SD 4.0.2.0 Huawei P30 – Android 11.0 & SD 4.0.2.0
PC – Windows 10 (Home Ed) Version 22H2, Build 19045.5737, SD 4.0.2.0
|
|
|
|
|
Tim Dawson
|
|
|
Group: Forum Members
Posts: 8.1K,
Visits: 9.2K
|
See my post five posts above this one.
|
|
|
|
|
Sky Painter
|
|
|
Group: Forum Members
Posts: 626,
Visits: 15K
|
+xSee my post five posts above this one. This is soooo frustrating! I could refer you back to a couple of my posts, but let's not get into a virtual game of ping-pong! This is NOT a feature request. All I am asking for is for former functionality to be restored. In your reply to me posted on Monday 11 November 2019, you said "Your feedback has been noted" Perhaps that should read "Your feedback has been noted – and will be ignored"
Mike _________________________________________ Samsung Galaxy Tab A8 – Android 11.0 & SD 4.0.2.0 Huawei P30 – Android 11.0 & SD 4.0.2.0
PC – Windows 10 (Home Ed) Version 22H2, Build 19045.5737, SD 4.0.2.0
|
|
|
|
|
Tim Dawson
|
|
|
Group: Forum Members
Posts: 8.1K,
Visits: 9.2K
|
When we note feedback, it is so that we can carefully monitor potential issues to see if they really are issues. That means that a significant proportion of users have to feel that a behaviour is incorrect before we would take action to do something about it.
In this thread you have described a behaviour that is by design, one that has in fact always been by design, and one that we would not change unless we thought it was disliked by lots of our users.
Your feedback is not ignored, but that doesn't mean we are going to make changes to the way SkyDemon works just because you want us to.
|
|
|
|
|
Sky Painter
|
|
|
Group: Forum Members
Posts: 626,
Visits: 15K
|
+xWhen we note feedback, it is so that we can carefully monitor potential issues to see if they really are issues. That means that a significant proportion of users have to feel that a behaviour is incorrect before we would take action to do something about it.
In this thread you have described a behaviour that is by design, one that has in fact always been by design, and one that we would not change unless we thought it was disliked by lots of our users.
Your feedback is not ignored, but that doesn't mean we are going to make changes to the way SkyDemon works just because you want us to. Tim
Firstly, please accept my apologies if I seemed to come across a bit stroppy – it's only out of frustration!
Simply put, there was a time when georeferenced Pooley's plates were automatically displayed. Now they are not. And I am finding it very hard to understand why you are so reluctant to reinstate previous functionality which was only lost after the introduction of vectored mapping of airfields in the base map.
I know I'm labouring the point, but this is my last word on the subject and, somewhat reluctantly, I accept your position. Henceforth, I will bite my tongue, unless invited to comment further!
Mike _________________________________________ Samsung Galaxy Tab A8 – Android 11.0 & SD 4.0.2.0 Huawei P30 – Android 11.0 & SD 4.0.2.0
PC – Windows 10 (Home Ed) Version 22H2, Build 19045.5737, SD 4.0.2.0
|
|
|
|