Hi again!
Ok... the situation:

Yesterday I was flying to Calvì (Corsica) and while i was in the middle of the see 'Milano Info' told me to go direct to TORTU (an IFR waypoint). Cause it was not in my planned route and it wasn't visualized on the screen yet I did this:
Selected "Flight" menu, then "Direct to" then "find", taped TORTU and nothing happened, but I had only a black screen in the find list. I tried several times but nothing.
So I zoomed out till find the waypoint and when visualized I selected it and then Direct to.

Once on the ground I tried to find something else and the function gave me results only if I serched airports, cities or personal waypoints. It was impossible to find the official IFR or VFR waypoints.

I think this should be a foundamental function on the Mobile Device.

Once at home, I tried the "find" function on the planning software on the PC and it worked

Yep! Trying to keep interest in this...

Hi Tim!
I have a news about this problem.
In these days I tried to explore the Directories of the mobile with the intention to understand how it's otganized.
I did this keeping in mind your suggestion to verify if the chart was loaded and I replied that it was Autoloaded. Looking in the chart load/unload all countries are unloaded except for Italy (auto loaded) so I thought what happens if I try to load a chart and look for an IRP.
I loaded Swiss and looked for UTAVO and... it found it I looked for another pairs and it worked well.
I tried again with some in Italy and..... it worked

What hapens....

I rebooted the MD and the problem was still there... but once loaded a chart other than Italy (that it's autoloaded) the find function works also for the IRP in Italy.

I Think this is a bug... What do you think?

I loaded Switzerland (Swiss) as I said...

However... this morning I had a flight to Bergamo and I tried again with the find function with my method... it didn't work Now the mystery deepens and I'm getting frustrated.
I can't making it work again... aaaargh!!!!

Find it
I discovered that find function has this problem only when I change the Chart Appearance (yesterday evening I had US FAA Sectional VFR Charts selected).
At the moment I've found problems with 3 on 8 Appearance:

1- Skydemon Chart
2- German DFS VFR Charts
3- Skydemon Chart 2

I did several tests and everytime I select one of the appearance listed above, Find function fails in the search of an IRP waypoint

What do you think?