Login
Register
Login
Register
Back to SkyDemon Website
Important:
These forums are for discussions between SkyDemon users. They are not routinely monitored by SkyDemon staff so any urgent issues should be sent directly to our
Customer Support
.
Home
»
Discussion Forums
»
Suggestions and Beta Discussion
»
Bug reports
Bug reports
Post Reply
Like
109
Bug reports
View
Flat Ascending
Flat Descending
Threaded
Options
Subscribe to topic
Print This Topic
RSS Feed
Goto Topics Forum
Author
Message
RobinHood
RobinHood
posted 10/18/2013 8:24:10 AM
ANSWER
Topic Details
Share Topic
Group: Forum Members
Posts: 31,
Visits: 129
Hi,
Actually, I didn't find any place to report (possible) bugs or things I don't understand.
So I just opened this post and start with one point I just recognized:
@ Tim: Maybe it's possible to have a separate sub-forum for these things.
My current points:
- On the german chart the airport EDRS (
Flugplatz Bad Sobernheim-Domberg)
is not display on the map. But you can search for it and the right point is "crossed"
- On some airports the airport information is not complete or correct.
As an example there is EDMB (Flugplatz Biberach): Fuel availability: They have also AvGas 100LL (i just reported the actual price).
Is there any way to correct or update the data a "social way" like the price feature? If so, opening times would be a nice feature, too.
Best regards,
Robin Seidelmann
secosu | Consulting & Support
Experts for ERP-Evaluation & ERP-Implementation projects in Europe
Tags
bugs
Reply
Like
109
Replies
Tim Dawson
Tim Dawson
posted 10/25/2013 4:14:14 PM
ANSWER
Post Details
Share Post
Group: Forum Members
Posts: 8.1K,
Visits: 9.4K
Yes, confirmed. It is almost certainly your minimum runway length setting which is preventing it from being shown.
Reply
Like
126
RobinHood
RobinHood
posted 10/27/2013 9:30:52 AM
ANSWER
Post Details
Share Post
Group: Forum Members
Posts: 31,
Visits: 129
Hi,
it's not the minimum runway setting (EDRS hass 600m and 700m).
I have twice a setting for minimum runway set to 200m:
1) Mapping -> Map Layers -> Airfields -> Min runway length: 200m
2) Setup -> Navigation Options -> Minimum Runway Length: 200m
But EDRS is not shown on the map, but can be found (only yellow cross on the map).
Could it be any other setting?? (unknown length is also enabled).
Maybe because EDRS was more then one runway??
Best regards,
Robin Seidelmann
secosu | Consulting & Support
Experts for ERP-Evaluation & ERP-Implementation projects in Europe
Reply
Like
109
GO
Merge Selected
Merge into selected topic...
Merge into merge target...
Merge into a specific topic ID...
Open Merge
Threaded View
Threaded View
Bug reports
RobinHood
-
10/18/2013 8:24:10 AM
I agree that it would be good to have a bug report section: I wanted...
richardc
-
10/19/2013 11:11:21 PM
No, this problem is well documented elsewhere on the forum...
Pete
-
10/19/2013 11:22:52 PM
Great, thanks Pete. I did have a trawl to see if I could find any...
richardc
-
10/20/2013 8:26:02 AM
If you can search for an airfield but do not see it on the map, it's...
Tim Dawson
-
10/21/2013 4:10:13 PM
I just checked the mapping settings (especially the in runway length)....
RobinHood
-
10/24/2013 10:21:39 PM
Yes, confirmed. It is almost certainly your minimum runway length...
Tim Dawson
-
10/25/2013 4:14:14 PM
Hi, it's not the minimum runway setting (EDRS hass 600m and 700m). I...
RobinHood
-
10/27/2013 9:30:52 AM
Please reduce your minimum runway length setting to 0. You will see...
Tim Dawson
-
10/28/2013 10:39:22 AM
Hi Tim, thank you for the hint with runway length 0. I still had a...
RobinHood
-
11/5/2013 1:56:23 PM
Post Reply
Like
109
Post Quoted Reply
Reading This Topic
Login
Login
Remember Me
Reset Password
Resend Validation Email
Login
Explore
Messages
Mentions
Search