help setting on GPS Satellite "china"

Important: These forums are for discussions between SkyDemon users. They are not routinely monitored by SkyDemon staff so any urgent issues should be sent directly to our Customer Support.

help setting on GPS Satellite "china"

Author	Message
*stevelup*	*stevelup* posted 5/11/2012 5:05:32 PM Post Details Share Post
Group: Moderators Posts: 593, Visits: 4.9K	95% of the time, it's 4800 baud and two very common COM ports are 4 and 7 So.. COM4 4800 and COM7 4800 would be the first I'd try! The other way you might be able to figure it out is to run the car GPS software that came on your device - it might show you the settings.
	Reply Like 102
nje	nje posted 5/11/2012 12:29:57 PM Post Details Share Post
Group: Forum Members Posts: 384, Visits: 4.2K	It all depends on which GPS device you have. I have one that uses com 0 baud 9600 and another com 1 baud 57600. It's trial and error. try starting with Com 0 baud 4800 and try each baud in turn. Then change to Com1 Baud 4800 and again go through all the baud settings until you find the correct one. Good Luck
	Reply Like 95
AWACS	AWACS posted 5/11/2012 10:33:39 AM Topic Details Share Topic
Group: Awaiting Activation Posts: 1, Visits: 24	section GPS Setup must be set up correctly in Skydemon Hardwere, the dirver I can not set them: that COM and Baud I enter to get a gps aviation and non-road? thank you very much Tags baud com driver hardwere satellite
	Reply Like 104