New feature: drawing custom traffic patterns

Important: These forums are for discussions between SkyDemon users. They are not routinely monitored by SkyDemon staff so any urgent issues should be sent directly to our Customer Support.

Home
»
Discussion Forums
»
Suggestions and Beta Discussion
»
New feature: drawing custom traffic patterns

New feature: drawing custom traffic patterns

Author	Message
Szepy	S Szepy posted 5/5/2021 8:40:50 PM Topic Details Share Topic
S Group: Forum Members Posts: 4, Visits: 3	Hi, I've not found this mentioned yet so I bring up this idea. Many ADs do not have "public" traffic patterns, at least not added to AIP. These are usually small, private ADs. Would be nice to have on option to draw a custom traffic pattern for them (like starting with defining RWY id, left/right handed pattern, height in AGL and possibly the distance of the legs from both ends/centerline of the RWY). It's custom for everyone, not necessarily shared but an option to create those would be nice addition. Everyone could maintain these for themselves, like looking into AD webpage if it has changed before planning a new flight there or gathering this from any other available source.
	Reply Like 2
pilot-byom	p pilot-byom posted 5/6/2021 12:03:34 AM Post Details Share Post
p Group: Forum Members Posts: 323, Visits: 388	Just use the Custom Data Editor in PC plan and do your pattern as a route, sync to cloud and enable, done.
	Reply Like 2
Tim Dawson	Tim Dawson posted 5/7/2021 1:51:22 PM Post Details Share Post
Group: Forum Members Posts: 7.8K, Visits: 8.4K	We don't plan on making tools available for defining custom circuits on private airfields, but if we have an airfield in our charts that we don't yet have circuit information for, you can send it to us and we'll depict it in our charts for everyone's benefit.
	Reply Like 3
Szepy	S Szepy posted 5/7/2021 9:21:09 PM Post Details Share Post
S Group: Forum Members Posts: 4, Visits: 3	+x Tim Dawson - 5/7/2021 1:51:22 PM We don't plan on making tools available for defining custom circuits on private airfields, but if we have an airfield in our charts that we don't yet have circuit information for, you can send it to us and we'll depict it in our charts for everyone's benefit. Thank you Tim, I've sent you the web page about Hungarian airports on your contact form - most of these are small strips which ones are missing their traffic patterns currently.
	Reply Like 1
Szepy	S Szepy posted 5/7/2021 9:25:28 PM Post Details Share Post
S Group: Forum Members Posts: 4, Visits: 3	+x pilot-byom - 5/6/2021 12:03:34 AM Just use the Custom Data Editor in PC plan and do your pattern as a route, sync to cloud and enable, done. Good idea, thanks. I'll also check it!
	Reply Like 2
pilot-byom	p pilot-byom posted 5/8/2021 8:08:07 AM Post Details Share Post
p Group: Forum Members Posts: 323, Visits: 388	+x Szepy - 5/7/2021 9:25:28 PM +x pilot-byom - 5/6/2021 12:03:34 AM Just use the Custom Data Editor in PC plan and do your pattern as a route, sync to cloud and enable, done. Good idea, thanks. I'll also check it! Works well, I use that for the AIP-unpublished but official traffic patterns at controlled airports. The only thing I miss is the ability in Skydemon to let the custom data stay on top of the approach charts.
	Reply Like 3
ax3biggles	a ax3biggles posted 11/9/2023 3:15:57 PM Post Details Share Post
a Group: Forum Members Posts: 1, Visits: 0	+x pilot-byom - 5/6/2021 12:03:34 AM Just use the Custom Data Editor in PC plan and do your pattern as a route, sync to cloud and enable, done. I have accessed Custom Data to try and draw a "route" and use it as a circuit pattern, however, despite many attempts, I cannot find out how to do this, any assistance would be most helpful
	Reply Like 2
ArnaudC	A ArnaudC posted 3/22/2024 12:39:52 PM Post Details Share Post
A Group: Forum Members Posts: 69, Visits: 108	+x ax3biggles - 11/9/2023 3:15:57 PM +x pilot-byom - 5/6/2021 12:03:34 AM Just use the Custom Data Editor in PC plan and do your pattern as a route, sync to cloud and enable, done. I have accessed Custom Data to try and draw a "route" and use it as a circuit pattern, however, despite many attempts, I cannot find out how to do this, any assistance would be most helpful Create the circuit's turning points as custom waypoints. Connect as needed. Voilà.
	Reply Like 1