Important: These forums are for discussions between SkyDemon users. They are not routinely monitored by SkyDemon staff so any urgent issues should be sent directly to our Customer Support.

Bearingless targets


Author
Message
Maverix
M
Too Much Forum (227 reputation)Too Much Forum (227 reputation)Too Much Forum (227 reputation)Too Much Forum (227 reputation)Too Much Forum (227 reputation)Too Much Forum (227 reputation)Too Much Forum (227 reputation)Too Much Forum (227 reputation)Too Much Forum (227 reputation)
Group: Forum Members
Posts: 53, Visits: 14
Hi,
when "show bearingless targets" is selected, what are the vertical and horizontal ranges/distances?
When does the bearingless target circle appear and when does it disappear?
Thanks.

grahamb
grahamb
Too Much Forum (4.7K reputation)Too Much Forum (4.7K reputation)Too Much Forum (4.7K reputation)Too Much Forum (4.7K reputation)Too Much Forum (4.7K reputation)Too Much Forum (4.7K reputation)Too Much Forum (4.7K reputation)Too Much Forum (4.7K reputation)Too Much Forum (4.7K reputation)
Group: Forum Members
Posts: 503, Visits: 25K
Maverix - 2/29/2020 4:45:25 PM
Hi,
when "show bearingless targets" is selected, what are the vertical and horizontal ranges/distances?
When does the bearingless target circle appear and when does it disappear?
Thanks.

Those parameters are set in your traffic device (presumably PilotAware). The way bearingless targets are detected and filtered is described in full in their documentation. 

Maverix
M
Too Much Forum (227 reputation)Too Much Forum (227 reputation)Too Much Forum (227 reputation)Too Much Forum (227 reputation)Too Much Forum (227 reputation)Too Much Forum (227 reputation)Too Much Forum (227 reputation)Too Much Forum (227 reputation)Too Much Forum (227 reputation)
Group: Forum Members
Posts: 53, Visits: 14
grahamb - 2/29/2020 6:44:41 PM
Maverix - 2/29/2020 4:45:25 PM
Hi,
when "show bearingless targets" is selected, what are the vertical and horizontal ranges/distances?
When does the bearingless target circle appear and when does it disappear?
Thanks.

Those parameters are set in your traffic device (presumably PilotAware). The way bearingless targets are detected and filtered is described in full in their documentation. 

I'm actually testing Stratux.
Stratux has no parameters for the bearingless targets.
It seems that Skydemon is showing bearingless targets within +/- 2.000 ft while the Stratux own radar shows also bearingless targets much higher or lower.
Can somebody confirm that Skydemon only shows bearingless targets within +/- 2.000 ft?

efrenken
efrenken
Too Much Forum (19K reputation)Too Much Forum (19K reputation)Too Much Forum (19K reputation)Too Much Forum (19K reputation)Too Much Forum (19K reputation)Too Much Forum (19K reputation)Too Much Forum (19K reputation)Too Much Forum (19K reputation)Too Much Forum (19K reputation)
Group: Forum Members
Posts: 265, Visits: 3.5K
Maverix - 2/29/2020 6:53:45 PM
grahamb - 2/29/2020 6:44:41 PM
Maverix - 2/29/2020 4:45:25 PM
Hi,
when "show bearingless targets" is selected, what are the vertical and horizontal ranges/distances?
When does the bearingless target circle appear and when does it disappear?
Thanks.

Those parameters are set in your traffic device (presumably PilotAware). The way bearingless targets are detected and filtered is described in full in their documentation. 

I'm actually testing Stratux.
Stratux has no parameters for the bearingless targets.
It seems that Skydemon is showing bearingless targets within +/- 2.000 ft while the Stratux own radar shows also bearingless targets much higher or lower.
Can somebody confirm that Skydemon only shows bearingless targets within +/- 2.000 ft?

Skydemon shows bearingless targets within the settings of the vertical filter, which you can find in the menu right above the switch ‘Show Bearingless Targets’. I believe this is set to 2000 ft as default.
Eric

Tim Dawson
Tim Dawson
SkyDemon Team (623K reputation)SkyDemon Team (623K reputation)SkyDemon Team (623K reputation)SkyDemon Team (623K reputation)SkyDemon Team (623K reputation)SkyDemon Team (623K reputation)SkyDemon Team (623K reputation)SkyDemon Team (623K reputation)SkyDemon Team (623K reputation)
Group: Forum Members
Posts: 7.8K, Visits: 8.4K
Please read the Stratux manual or ask their support for things like this. SkyDemon does not limit what is displayed more than the settings you have configured as documented above.
GO

Merge Selected

Merge into selected topic...



Merge into merge target...



Merge into a specific topic ID...




Reading This Topic

Login

Explore
Messages
Mentions
Search