Slovenian Entry/Exit Points - SD FPL's invalid

Important: These forums are for discussions between SkyDemon users. They are not routinely monitored by SkyDemon staff so any urgent issues should be sent directly to our Customer Support.

Home
»
Discussion Forums
»
SkyDemon Flight Planning
»
Slovenian Entry/Exit Points - SD FPL's invalid

Slovenian Entry/Exit Points - SD FPL's invalid

Author	Message
AndreasMueller	A AndreasMueller posted 2/23/2017 6:10:56 AM Post Details Share Post
A Group: Forum Members Posts: 1, Visits: 0	It helps to insert a IFR waypoint which is near your requested entrypoint. ‌ ‌Andreas Mueller
	Reply Like 62
Easy Cruising	Easy Cruising posted 8/2/2017 8:37:31 AM Post Details Share Post
Group: Forum Members Posts: 50, Visits: 39	Just as a follow-up to this one: yesterday I made a vfr flight from ostrava to portoroz in Slovenia. I entered Slovenia via RADLY point and followed the route VFR1 to Portoroz. I set my SD FPL waypoints at all the visual reporting points like TREBNJE but the SD FPL contained only RADLY VFR1 (names not coordinates) for the Slovenian portion. I manually entered an RMK to indicate entry to Slovenia via RADLY also. This FPL was accepted and I flew it with no issues. It's not clear to me why SD puts in VFR1 to represent all the other points but it did work.
	Reply Like 38
ckurz7000	ckurz7000 posted 8/2/2017 2:03:27 PM Post Details Share Post
Group: Forum Members Posts: 538, Visits: 2.2K	+x Easy Cruising - 8/2/2017 8:37:31 AM Just as a follow-up to this one: yesterday I made a vfr flight from ostrava to portoroz in Slovenia. I entered Slovenia via RADLY point and followed the route VFR1 to Portoroz. I set my SD FPL waypoints at all the visual reporting points like TREBNJE but the SD FPL contained only RADLY VFR1 (names not coordinates) for the Slovenian portion. I manually entered an RMK to indicate entry to Slovenia via RADLY also. This FPL was accepted and I flew it with no issues. It's not clear to me why SD puts in VFR1 to represent all the other points but it did work. When you are following an official VFR route you specify the point atwhich you join the route followed by the route name and the point at which you exit. So what SD generated is perfectly OK and ought to work, which it apparently did. -- Chris.‌‌
	Reply Like 41