Waiting for Location Data - Bluetooth GPS fail since iPad SW update

Important: These forums are for discussions between SkyDemon users. They are not routinely monitored by SkyDemon staff so any urgent issues should be sent directly to our Customer Support.

Waiting for Location Data - Bluetooth GPS fail since iPad SW update

Author	Message
schweboo	schweboo posted 4/12/2015 5:55:20 AM Post Details Share Post
Group: Forum Members Posts: 21, Visits: 71	30 seconds? More like 10 seconds. Tried using Skydemon with my Dual XGPS150 yesterday and it just did not give me a location for more than 10 seconds. My Garmin GPS was working just fine, so I know that I had a good GPS signal. I have also just upgraded to IOS 8.3 Any ideas most welcome...
	Reply Like 83
Aussie Andy	Aussie Andy posted 4/10/2015 8:13:42 PM HOT Topic Details Share Topic
Group: Forum Members Posts: 28, Visits: 67	Hi there, I use SD on my iPad with a DUAL XGPS150 Bluetooth GPS sensor. Since the last iPad iOS SW update this week (now on iOS 8.3) this problem seems to have arisen... When I tell SD to "Go Flying" it initially picks up the location OK but within 30 seconds it seems to disconnect from the GPS and the dreaded "Waiting for Location Data" message comes up. Can you help? Thanks, Andy
	Reply Like 89