Back to SkyDemon Website
Important: These forums are for discussions between SkyDemon users. They are not routinely monitored by SkyDemon staff so any urgent issues should be sent directly to our Customer Support.

France / Channel Islands Chart Problem on MD


France / Channel Islands Chart Problem on MD
View
Options
Author
Message
Wessex
Wessex
Wessex
posted 8/18/2013 5:45:58 PM
Too Much Forum (175 reputation)Too Much Forum (175 reputation)Too Much Forum (175 reputation)Too Much Forum (175 reputation)Too Much Forum (175 reputation)Too Much Forum (175 reputation)Too Much Forum (175 reputation)Too Much Forum (175 reputation)Too Much Forum (175 reputation)
Group: Forum Members
Posts: 2, Visits: 20
For Info:

Last week using Skydemon 2.7 on the Mobile device flew Isle of White, Garmi, MP (Cherbourg) Carteret Lighthouse, Jersey

After MP, heading towards Jersey the MD displayed Cherbourg and the channel Islands

Approx 10 nm south of MP (thus using the French Chart) the MD unloaded the UK charts with the result that the Channel Islands were no longer displayed.

At no time during the rest of the flight despite being back in UK airspace heading to Jersey, did the MD load the UK charts

Also, over France close to the Carteret lighthouse, Skydemon stopped logging.

I have discussed the problem with Hanna at Skydemon who suggested it was a chart loading issue and that the logging issue may be due to loss of GPS signal

I was also able to repeat the problem using the MD in Simulator mode

Brian Lesslie
Reply Like 47
GO

Merge Selected

Merge into selected topic...



Merge into merge target...



Merge into a specific topic ID...



Submit

Threaded View
Threaded View
France / Channel Islands Chart Problem on MD
Wessex - 8/18/2013 5:45:58 PM
     The Mobile MD will only load charts if you are within their...
Tim Dawson - 8/27/2013 3:55:17 PM
             As per my original post, using SD mobile device and SD 2.7 Loaded...
Wessex - 9/2/2013 10:52:44 AM
     Thank you. Those steps helped us to identify what was wrong, and to...
Tim Dawson - 9/6/2013 2:59:22 PM

Post Quoted Reply
Reading This Topic

Powered by InstantForum 2017-0 Final © 2025
Execution: 0.000. 2 queries. Compression Enabled.

Login

Explore
Messages
Mentions
Search