Important: These forums are for discussions between SkyDemon users. They are not routinely monitored by SkyDemon staff so any urgent issues should be sent directly to our Customer Support.

France / Channel Islands Chart Problem on MD


Author
Message
Tim Dawson
Tim Dawson
SkyDemon Team (665K reputation)SkyDemon Team (665K reputation)SkyDemon Team (665K reputation)SkyDemon Team (665K reputation)SkyDemon Team (665K reputation)SkyDemon Team (665K reputation)SkyDemon Team (665K reputation)SkyDemon Team (665K reputation)SkyDemon Team (665K reputation)
Group: Forum Members
Posts: 8K, Visits: 9.1K
Thank you. Those steps helped us to identify what was wrong, and to put a fix in place. The fix will be in the next release of SkyDemon.
Wessex
Wessex
Too Much Forum (175 reputation)Too Much Forum (175 reputation)Too Much Forum (175 reputation)Too Much Forum (175 reputation)Too Much Forum (175 reputation)Too Much Forum (175 reputation)Too Much Forum (175 reputation)Too Much Forum (175 reputation)Too Much Forum (175 reputation)
Group: Forum Members
Posts: 2, Visits: 20
As per my original post, using SD mobile device and SD 2.7

Loaded Routing:

Fairoaks - Sandown - St Catherines point VRP - Garmi - MP (Cherbourg) - Carteret Lighthouse VRP - JSY - Jersey

All was well until south of MP heading to Carteret Lighthouse when I was cleared direct to Jersey. Expanding the map scale displayed the French coast and a dot where JSY is but no UK chart info.

Incidentally, Flew last week around Jersey, the SD mobile found its position but again would not automatically load the UK charts - had to load the UK chart manually to display the Islands

Regards







Tim Dawson
Tim Dawson
SkyDemon Team (665K reputation)SkyDemon Team (665K reputation)SkyDemon Team (665K reputation)SkyDemon Team (665K reputation)SkyDemon Team (665K reputation)SkyDemon Team (665K reputation)SkyDemon Team (665K reputation)SkyDemon Team (665K reputation)SkyDemon Team (665K reputation)
Group: Forum Members
Posts: 8K, Visits: 9.1K
The Mobile MD will only load charts if you are within their geographical boundaries. The "geographical boundaries" of the UK chart are specially increased to include the channel islands CTR. Could you give us exact steps to reproduce (in the simulator) the situation you describe where the unit will unload the UK chart then subsequently fail to load it again?

Many thanks.
Wessex
Wessex
Too Much Forum (175 reputation)Too Much Forum (175 reputation)Too Much Forum (175 reputation)Too Much Forum (175 reputation)Too Much Forum (175 reputation)Too Much Forum (175 reputation)Too Much Forum (175 reputation)Too Much Forum (175 reputation)Too Much Forum (175 reputation)
Group: Forum Members
Posts: 2, Visits: 20
For Info:

Last week using Skydemon 2.7 on the Mobile device flew Isle of White, Garmi, MP (Cherbourg) Carteret Lighthouse, Jersey

After MP, heading towards Jersey the MD displayed Cherbourg and the channel Islands

Approx 10 nm south of MP (thus using the French Chart) the MD unloaded the UK charts with the result that the Channel Islands were no longer displayed.

At no time during the rest of the flight despite being back in UK airspace heading to Jersey, did the MD load the UK charts

Also, over France close to the Carteret lighthouse, Skydemon stopped logging.

I have discussed the problem with Hanna at Skydemon who suggested it was a chart loading issue and that the logging issue may be due to loss of GPS signal

I was also able to repeat the problem using the MD in Simulator mode

Brian Lesslie
GO

Merge Selected

Merge into selected topic...



Merge into merge target...



Merge into a specific topic ID...




Reading This Topic

Login

Explore
Messages
Mentions
Search