+x

 

Michael Hoffmann - 11/16/2024 6:03:54 PM

Thanks to Tim there is now an Android beta with support of the Becker AR6201 protocol.

https://www.skydemon.aero/start/beta.aspx

Here is my solution to connect a BLE device to the Becker AR6201 radio:

Bill of material:

DSD TECH HM-10 Bluetooth 4.0 BLE iBeacon UART Modul mit 4 PIN Base Board für Arduino UNO R3 Mega 2560 Nano

https://www.amazon.de/dp/B06WGZB2N4?ref_=ppx_hzod_title_dt_b_fed_asin_title_0_0

RS422 MAX490 Mutual Transfer Full-duplex TTL Bi-directional Signal Module DC 5V

https://www.ebay.de/itm/266249894496

AMS1117 DC-DC Step Down Voltage Converter 6V - 12V to 5V

https://www.ebay.de/itm/295478609251

Minifuse 125 mA

https://www.reichelt.de/kleinstsicherung-superflink-125-ma-litt-0251-125mat-p242296.html?PROVID=2788&gad_source=1&gclid=EAIaIQobChMIsK2ruLbhiQMVS_B5BB0FRTUPEAQYASABEgIVXvD_BwE

My BLE to AR620x housing

Please contact me for STL-files, if needed.

The schematic of the circuit is attached.

Please note this is only for 12 V bus voltage,

and ONLY for experimental use!!!

Cheers!

+x

 

Michael Hoffmann - 12/15/2024 7:38:39 PM

+x

 

Michael Hoffmann - 11/16/2024 6:03:54 PM

Thanks to Tim there is now an Android beta with support of the Becker AR6201 protocol.

https://www.skydemon.aero/start/beta.aspx

Here is my solution to connect a BLE device to the Becker AR6201 radio:

Bill of material:

DSD TECH HM-10 Bluetooth 4.0 BLE iBeacon UART Modul mit 4 PIN Base Board für Arduino UNO R3 Mega 2560 Nano

https://www.amazon.de/dp/B06WGZB2N4?ref_=ppx_hzod_title_dt_b_fed_asin_title_0_0

RS422 MAX490 Mutual Transfer Full-duplex TTL Bi-directional Signal Module DC 5V

https://www.ebay.de/itm/266249894496

AMS1117 DC-DC Step Down Voltage Converter 6V - 12V to 5V

https://www.ebay.de/itm/295478609251

Minifuse 125 mA

https://www.reichelt.de/kleinstsicherung-superflink-125-ma-litt-0251-125mat-p242296.html?PROVID=2788&gad_source=1&gclid=EAIaIQobChMIsK2ruLbhiQMVS_B5BB0FRTUPEAQYASABEgIVXvD_BwE

My BLE to AR620x housing

Please contact me for STL-files, if needed.

The schematic of the circuit is attached.

Please note this is only for 12 V bus voltage,

and ONLY for experimental use!!!

Cheers!

I have the next AR620x adapter ready. It looks like this is becoming a business model for some people...
But you can make the adapter yourself as described above.
If you don't know much about electronics, soldering and 3D printing, I'll do it for you. No large quantities, just one handmade piece at a time. The adapter fits directly onto the free connection of your Becker AR620x. All that is required is a power connection (+12 V, GND) - no further mechanical work.

I guess 70-90 bugs is enough for one unit.

 

Please note: THIS IS 12 V EXPERIMEMTAL ONLY!

... but will work like a charme...

Cheers!

+x

 

ALSL-Flyer - 12/15/2024 8:50:32 PM

+x

 

Michael Hoffmann - 12/15/2024 7:38:39 PM

+x

 

Michael Hoffmann - 11/16/2024 6:03:54 PM

Thanks to Tim there is now an Android beta with support of the Becker AR6201 protocol.

https://www.skydemon.aero/start/beta.aspx

Here is my solution to connect a BLE device to the Becker AR6201 radio:

Bill of material:

DSD TECH HM-10 Bluetooth 4.0 BLE iBeacon UART Modul mit 4 PIN Base Board für Arduino UNO R3 Mega 2560 Nano

https://www.amazon.de/dp/B06WGZB2N4?ref_=ppx_hzod_title_dt_b_fed_asin_title_0_0

RS422 MAX490 Mutual Transfer Full-duplex TTL Bi-directional Signal Module DC 5V

https://www.ebay.de/itm/266249894496

AMS1117 DC-DC Step Down Voltage Converter 6V - 12V to 5V

https://www.ebay.de/itm/295478609251

Minifuse 125 mA

https://www.reichelt.de/kleinstsicherung-superflink-125-ma-litt-0251-125mat-p242296.html?PROVID=2788&gad_source=1&gclid=EAIaIQobChMIsK2ruLbhiQMVS_B5BB0FRTUPEAQYASABEgIVXvD_BwE

My BLE to AR620x housing

Please contact me for STL-files, if needed.

The schematic of the circuit is attached.

Please note this is only for 12 V bus voltage,

and ONLY for experimental use!!!

Cheers!

I have the next AR620x adapter ready. It looks like this is becoming a business model for some people...
But you can make the adapter yourself as described above.
If you don't know much about electronics, soldering and 3D printing, I'll do it for you. No large quantities, just one handmade piece at a time. The adapter fits directly onto the free connection of your Becker AR620x. All that is required is a power connection (+12 V, GND) - no further mechanical work.

I guess 70-90 bugs is enough for one unit.

 

Please note: THIS IS 12 V EXPERIMEMTAL ONLY!

... but will work like a charme...

Cheers!

Michael, this looks like a perfect solution! Great! You fixed the connector with the slider - could you please share the source for this slider?

+x

 

Michael Hoffmann - 12/15/2024 9:16:39 PM

+x

 

ALSL-Flyer - 12/15/2024 8:50:32 PM

+x

 

Michael Hoffmann - 12/15/2024 7:38:39 PM

+x

 

Michael Hoffmann - 11/16/2024 6:03:54 PM

Thanks to Tim there is now an Android beta with support of the Becker AR6201 protocol.

https://www.skydemon.aero/start/beta.aspx

Here is my solution to connect a BLE device to the Becker AR6201 radio:

Bill of material:

DSD TECH HM-10 Bluetooth 4.0 BLE iBeacon UART Modul mit 4 PIN Base Board für Arduino UNO R3 Mega 2560 Nano

https://www.amazon.de/dp/B06WGZB2N4?ref_=ppx_hzod_title_dt_b_fed_asin_title_0_0

RS422 MAX490 Mutual Transfer Full-duplex TTL Bi-directional Signal Module DC 5V

https://www.ebay.de/itm/266249894496

AMS1117 DC-DC Step Down Voltage Converter 6V - 12V to 5V

https://www.ebay.de/itm/295478609251

Minifuse 125 mA

https://www.reichelt.de/kleinstsicherung-superflink-125-ma-litt-0251-125mat-p242296.html?PROVID=2788&gad_source=1&gclid=EAIaIQobChMIsK2ruLbhiQMVS_B5BB0FRTUPEAQYASABEgIVXvD_BwE

My BLE to AR620x housing

Please contact me for STL-files, if needed.

The schematic of the circuit is attached.

Please note this is only for 12 V bus voltage,

and ONLY for experimental use!!!

Cheers!

I have the next AR620x adapter ready. It looks like this is becoming a business model for some people...
But you can make the adapter yourself as described above.
If you don't know much about electronics, soldering and 3D printing, I'll do it for you. No large quantities, just one handmade piece at a time. The adapter fits directly onto the free connection of your Becker AR620x. All that is required is a power connection (+12 V, GND) - no further mechanical work.

I guess 70-90 bugs is enough for one unit.

 

Please note: THIS IS 12 V EXPERIMEMTAL ONLY!

... but will work like a charme...

Cheers!

Michael, this looks like a perfect solution! Great! You fixed the connector with the slider - could you please share the source for this slider?

Amphenol Conec 165X11299XE

You will need the slider, the spring and 4 of 6 screws.

https://www.digikey.de/de/products/detail/amphenol-conec/165X11299XE/1017451?srsltid=AfmBOoqFji0EENN9MVwPm7CfNOq5eAT4pUIFHrqCrk8X-L_AZz48RMad