SkyDemon + PowerFlarm Fusion

Important: These forums are for discussions between SkyDemon users. They are not routinely monitored by SkyDemon staff so any urgent issues should be sent directly to our Customer Support.

SkyDemon + PowerFlarm Fusion

Author	Message
Tim Dawson	Tim Dawson posted 6/29/2021 1:12:07 PM Post Details Share Post
Group: Forum Members Posts: 7.8K, Visits: 8.4K	You said above that the wifi is unable and loses connection, which is something independent of SkyDemon. It sounds like maybe your Flarm device is going wrong when transmitting data through the dedicated Fusion option; perhaps it's resetting itself if the wifi link goes down. That is speculation on my part, though. If SkyDemon dumps you back to planning mode giving you some invalid input received from the Flarm device, that's another situation entirely. That suggests that it's sending bad data, at which point SkyDemon terminates the connection deliberately.
	Reply Like 1
astf7	a astf7 posted 7/3/2021 10:37:04 AM Post Details Share Post
a Group: Forum Members Posts: 2, Visits: 0	I tested 1.2.2 beta yesterday and it seems to work just fine, no disconnections at all. It will probably be released very soon.
	Reply Like 1
lhe	lhe posted 7/5/2021 6:54:27 PM Post Details Share Post
Group: Forum Members Posts: 144, Visits: 445	+x astf7 - 7/3/2021 10:37:04 AM I tested 1.2.2 beta yesterday and it seems to work just fine, no disconnections at all. It will probably be released very soon. You mean 1.2.2 beta of the FLARM Hub firmware? Edited 7/5/2021 9:12:04 PM by lhe
	Reply Like 1
beersc	b beersc posted 7/6/2021 6:52:26 AM Post Details Share Post
b Group: Forum Members Posts: 5, Visits: 6	+x astf7 - 7/3/2021 10:37:04 AM I tested 1.2.2 beta yesterday and it seems to work just fine, no disconnections at all. It will probably be released very soon. Yes, Flarm contacted me recently saying they found an issue, and provided flarmhub beta version 1.22 to test. It performed flawlessly! So it seems they have solved the issue.
	Reply Like 1