LIMP twy T missing on SD plate

Important: These forums are for discussions between SkyDemon users. They are not routinely monitored by SkyDemon staff so any urgent issues should be sent directly to our Customer Support.

LIMP twy T missing on SD plate

Author	Message
Morby	M Morby posted 3/14/2021 1:58:18 PM Topic Details Share Topic
M Group: Forum Members Posts: 3, Visits: 8	Dear SD team, the LIMP SD’s aerodrome chart is missing twy T, connecting twy A to twy B. Please note that twy E crossing apron 100 is correct even if not yet shown in all AIP documents (for the eastern apron, the most comprehensive document at the time of writing seems to be the “aircraft parking docking chart” AD 2 LIMP 2-5 18 June 2020). Thank you for the support. Best regards.
	Reply Like 4
Replies
Tim Dawson	Tim Dawson posted 3/15/2021 10:59:27 AM Post Details Share Post
Group: Forum Members Posts: 8.1K, Visits: 9.2K	Thanks, I will pass this information along to my colleague.
	Reply Like 4
Morby	M Morby posted 4/3/2021 9:50:34 AM Post Details Share Post
M Group: Forum Members Posts: 3, Visits: 8	+x Tim Dawson - 3/15/2021 10:59:27 AM Thanks, I will pass this information along to my colleague. Dear Tim, first of all thank you and the SD team for updating the chart already. As I mentioned in the previous post, unfortunately twys do not seem to be updated across all the AIP documents. Below the chart before (left) and after (right) the latest update: If you could have them merged (i.e. showing both twy E and T) it would be perfect. I see that in other charts IHP (intermediate holding points) are also marked. For LIMP these are E1 and T1: I do not know if this could be of interest, however on the western apron, on twys D and F, there are also the three "release points" D1, D2 and F1 marking hotspots (see AD 2 LIMP 2-3 Hotspot map 18 JUN 2020): Sorry for bothering again and thank you for your help and patience. Best regards.
	Reply Like 4