+x

 

Tim Dawson - 10/24/2019 12:42:51 PM

We are aware that the FIC borders in Italy do not correspond with FIR borders. However they are both defined in AIP Italy ENR 2.1.

I will ask my colleague to check the data; what are you using as your reference to make you believe that in SkyDemon the areas are misdefined?

Many thanks

+x

 

giannisd - 10/24/2019 1:25:04 PM

+x

 

Tim Dawson - 10/24/2019 12:42:51 PM

We are aware that the FIC borders in Italy do not correspond with FIR borders. However they are both defined in AIP Italy ENR 2.1.

I will ask my colleague to check the data; what are you using as your reference to make you believe that in SkyDemon the areas are misdefined?

Many thanks

I use either the ENR 6.1.1 and 6.3 VFR maps published on AIP, on 6.3 VFR maps you will find a black line box with the 2 Freq. N and S.               

Go to Italian AIP (https://www.enav.it/sites/private/it/ServiziOnline/ENR.html), open with Adobe reader the 6.1-1,  you can use the Layer Menu to make visible or not visible each layer, since layer are divided by CTA, TMA, FIR/UIR/ACC is easy to recognise each areas. 

Now look your maps like Padova ACC/FIS,  the informations are correct regarding NW and SE. If you touch the screen on each of these area, the pop-up panel came out with correct Freq and yellow border are visible for the 2 areas.

Try to touch the screen of your maps in an area of Milano ACC/FIC,  in any point, but North of the Po river,  you will find the FIS Freq, but the yellow border show the CTA 1 area not the ACC/FIS area divided in 2 area, (actually the CTA 1 is a single area).

Now try to touch an area south of Po river i.e on land or even on a sea,  no pop-up info come out nor the Freq. and no yellow border is shown.

   

+x

 

Tim Dawson - 10/25/2019 9:10:04 AM

Thanks, we will investigate this and come back to you.