Control when Skydemon thinks I have landed

Important: These forums are for discussions between SkyDemon users. They are not routinely monitored by SkyDemon staff so any urgent issues should be sent directly to our Customer Support.

Home
»
Discussion Forums
»
SkyDemon Navigation
»
Control when Skydemon thinks I have landed

Control when Skydemon thinks I have landed

Author	Message
pmkarlss	p pmkarlss posted 4/26/2018 6:33:20 AM Topic Details Share Topic
p Group: Forum Members Posts: 10, Visits: 1	Skydemon seems to think I am still flying while having landed minutes ago. As long as I taxi in ~20+ knots or so it thinks I am airborne, hence the landing time is incorrect which is quite annoying when I am to write in my logbook.... Is there a way to control this setting?
	Reply Like 29
T67M	T67M posted 4/26/2018 1:15:24 PM Post Details Share Post
Group: Forum Members Posts: 206, Visits: 3.2K	Taxi at a more reasonable speed? Most light aircraft should be taxied at less than 10 knots. Even commercial airlines rarely exceed 20 knots on the ground, and the typically don't have prop clearance issues to worry about.
	Reply Like 35
drnicolas	drnicolas posted 4/29/2018 9:10:38 AM Post Details Share Post
Group: Forum Members Posts: 99, Visits: 114	+x T67M - 4/26/2018 1:15:24 PM Taxi at a more reasonable speed? Most light aircraft should be taxied at less than 10 knots. Even commercial airlines rarely exceed 20 knots on the ground, and the typically don't have prop clearance issues to worry about. Upon this posting , I took a closer look at my logs: I see no difference between Log Start/Take off and Log Stop/Landing. It is always the same time. Is thsi behaviour intended? there seems to be no Blocks off/on Timing. And I definitely tax with less than 20 knots. E.g. at the Aero I had about 40 Minutes! time queuing up for departure, so there is a large differencd between‌‌‌‌‌‌ block-time and flight-time in this case.
	Reply Like 36
Tim Dawson	Tim Dawson posted 4/30/2018 9:13:17 AM Post Details Share Post
Group: Forum Members Posts: 8.1K, Visits: 9.3K	If you are sitting stationary but your GPS is telling SkyDemon your speed is 26 knots, then your GPS is the problem. SkyDemon has a pretty good‌‌ algorithm for determining when you have landed, but speed is part of that calculation. If you're doing 26 knots, that doesn't sound like a taxi.
	Reply Like 28
pmkarlss	p pmkarlss posted 5/1/2018 6:53:00 PM Post Details Share Post
p Group: Forum Members Posts: 10, Visits: 1	+x Tim Dawson - 4/30/2018 9:13:17 AM If you are sitting stationary but your GPS is telling SkyDemon your speed is 26 knots, then your GPS is the problem. SkyDemon has a pretty good‌‌ algorithm for determining when you have landed, but speed is part of that calculation. If you're doing 26 knots, that doesn't sound like a taxi. This flightlog was actually recorded in a CRJ, and we did not always taxi at 26 kts, but nevertheless the recorded landing time and the actual landing time differed almost 10 mins. Would be nice to be able to control this otherwise very nice feature.
	Reply Like 30
Tim Dawson	Tim Dawson posted 5/2/2018 1:17:27 PM Post Details Share Post
Group: Forum Members Posts: 8.1K, Visits: 9.3K	I'm afraid the feature is designed to work for the vast majority of use cases out there. If you're regularly taxiing at that sort of speed, the feature simply isn't for you, sorry. We don't generally add options to make such features work in edge cases because options confuse matters.
	Reply Like 26