Constant reversion back to IFR vectoring chart during ILS approach

Important: These forums are for discussions between SkyDemon users. They are not routinely monitored by SkyDemon staff so any urgent issues should be sent directly to our Customer Support.

Constant reversion back to IFR vectoring chart during ILS approach

Author	Message
DavidC	DavidC posted 1/2/2018 9:06:42 AM Topic Details Share Topic
Group: Forum Members Posts: 23, Visits: 30	I backseated an ILS procedural approach into Gloucester a couple of days ago. Called up the ILS chart overlay which has always worked well, but frequently SD replaced that with the IFR radar vectoring chartlet. See below left. Very unhelpful and renders the ILS approach chart display useless, and irrelevant since Gloucester don't have radar service available so much these days. I‌s there any way to prevent this happening? S‌D version 3.9.0.97 ‌‌‌‌ --- CPL/IR/FI based in South of England
	Reply Like 25
Tim Dawson	Tim Dawson posted 1/2/2018 10:46:36 AM Post Details Share Post
Group: Forum Members Posts: 8K, Visits: 9.1K	Please contact customer support about this issue.
	Reply Like 24
DavidC	DavidC posted 1/2/2018 3:06:20 PM Post Details Share Post
Group: Forum Members Posts: 23, Visits: 30	Unbelievably rapid respond to my support query this afternoon.... "We recently added some more plates for georeferencing (things like local entry/exit lanes that people would find useful), and in doing so, it looks like this particular one has slipped in. We will remove the georeferencing for this plate, which should take effect in the next couple of days, but in the meantime, if you manually delete the plate from your cache (open the airfield information tab then swipe to the left across the listed plate) it won't overlay automatically.‌" --- CPL/IR/FI based in South of England
	Reply Like 21
Wheal	W Wheal posted 1/6/2018 5:55:14 PM Post Details Share Post
W Group: Forum Members Posts: 6, Visits: 4	+x DavidC - 1/2/2018 3:06:20 PM Unbelievably rapid respond to my support query this afternoon.... "We recently added some more plates for georeferencing (things like local entry/exit lanes that people would find useful), and in doing so, it looks like this particular one has slipped in. We will remove the georeferencing for this plate, which should take effect in the next couple of days, but in the meantime, if you manually delete the plate from your cache (open the airfield information tab then swipe to the left across the listed plate) it won't overlay automatically.‌"
	Reply Like 45
Wheal	W Wheal posted 1/6/2018 6:13:05 PM Post Details Share Post
W Group: Forum Members Posts: 6, Visits: 4	Hi, some time ago I asked if you were going to geo reference IFR plates and was told that it was time consuming and expensive, which I can understand. However, having used the referenced plates at Gloucester (as an aid not for primary navigation) they were fantastic and would gladly pay extra to have similar plates for other airfields. Thanks, Paul.
	Reply Like 46