Tape measure?

Important: These forums are for discussions between SkyDemon users. They are not routinely monitored by SkyDemon staff so any urgent issues should be sent directly to our Customer Support.

Tape measure?

Author	Message
mr_rodge	mr_rodge posted 1/12/2012 2:42:49 PM Topic Details Share Topic
Group: Forum Members Posts: 22, Visits: 70	Hi all, A simple and extremely useful addition to the software would be to have a 'tape measure' tool that could be used to measure the difference between two points. I know it can be done by drawing a route, but if I have already planned my flight and want to know an accurate distance between two points en-route, such as the exact length of a water crossing, I feel something like this would be more useful than the chart scale. Cheers.
	Reply Like 125
Tim Dawson	Tim Dawson posted 1/12/2012 4:37:26 PM Post Details Share Post
Group: Forum Members Posts: 8K, Visits: 9K	I agree it would be useful. How would you envisage such a tool working?
	Reply Like 100
adhawkins	adhawkins posted 1/13/2012 12:18:17 PM Post Details Share Post
Group: Forum Members Posts: 274, Visits: 2.5K	Click a 'Measure' button on the toolbar to enter 'measure mode'. Click on a point, then as you drag the mouse around it gives you distance and bearing from the point you originally clicked (either as a tooltip or in the status bar somewhere). ESC or click the toolbar button again to leave measure mode.
	Reply Like 97
mr_rodge	mr_rodge posted 1/17/2012 3:23:06 PM Post Details Share Post
Group: Forum Members Posts: 22, Visits: 70	What the above says Maybe it could 'snap' to things that aren't normally 'snappable' as well, such as town/village boundaries/centres, shore lines etc etc. Cheers.
	Reply Like 106
luigi692	luigi692 posted 2/19/2012 6:14:42 PM Post Details Share Post
Group: Forum Members Posts: 5, Visits: 21	I agree, this would be an extremely useful tool, especially to find bearing and distance from a VOR or NDB One could for ex hold the <Shift> key while dragging the cursor on the screen and a label would appear to indicate distance and bearing between initial point and cursor position, or on a pop up form like the Google Earth ruler tool. Tags bearing distance measure ruler
	Reply Like 105
helisharing_dot_co_dot_uk	helisharing_dot_co_dot_uk posted 2/21/2012 6:11:25 PM Post Details Share Post
Group: Forum Members Posts: 11, Visits: 17	Agree it would be a nice feature - but with the addition of the ipad shifts become a bit harder to do! Like the idea of - click the measure button, tap the start point, tap the end point line is drawn showing distance and vector - tap the measure button or dbl-tap the line to clear the line. That is remarkably similar functionality to google earth measure.
	Reply Like 112