Possible issue with Italy chart

Important: These forums are for discussions between SkyDemon users. They are not routinely monitored by SkyDemon staff so any urgent issues should be sent directly to our Customer Support.

Possible issue with Italy chart

Author	Message
filippo1974	filippo1974 posted 11/16/2011 9:55:42 PM Topic Details Share Topic
Group: Forum Members Posts: 12, Visits: 38	Hi All, I've noticed a probable issue with Italy charts. I've installed the latest version of SkyDemon Charts for Italy, Austria and Switzerland. I've noticed that Bolzano aerodrome shows two overlapping ATZs with same vertical limits (one is biscuit-shaped, the other is round; the Italian AIP only shows the biscuit-shaped ATZ). Similarly, the nearby Trento airport appears to have no ATZ in SkyDemon, while the AIP instead shows a round ATZ. For clarifications, You can refer to Italian AIP, ENR 6.3-5 (Padova VFR chart). Best regards, Filippo ============================================== Filippo1974 PPL(A) holder - CPL + IR + MEP in progress Senior specialist in throwing Italian ATS units into panic every weekend.
	Reply Like 48
Rob Hart	Rob Hart posted 11/21/2011 12:42:32 PM Post Details Share Post
Group: Forum Members Posts: 77, Visits: 454	Filippo, you are quite correct and I will amend these soonest. Thanks for bringing these to our attention, and if you see anything else at all that seems out of place I will investigate and correct as soon as possible. Rob
	Reply Like 42
filippo1974	filippo1974 posted 11/24/2011 2:25:28 PM Post Details Share Post
Group: Forum Members Posts: 12, Visits: 38	Hi Rob, Thank You for the prompt reply. I'll wait for revised chart updates! With best regards, Filippo ============================================== Filippo1974 PPL(A) holder - CPL + IR + MEP in progress Senior specialist in throwing Italian ATS units into panic every weekend.
	Reply Like 46