Land here (but we don't refuel)

Important: These forums are for discussions between SkyDemon users. They are not routinely monitored by SkyDemon staff so any urgent issues should be sent directly to our Customer Support.

Land here (but we don't refuel)

Author	Message
Daniel Biton	Daniel Biton posted 9/9/2024 4:12:51 PM Post Details Share Post
Group: Forum Members Posts: 24, Visits: 307	Thanks for your answer. I fact, I was doing what you describe. After a totol of 3 hours plus landing and take off, it is just time to have a drink, for us and the Zenair. Flying, for us is not mandatory, it has to be a pleasure. Dan.
	Reply Like 2
grahamb	grahamb posted 9/7/2024 11:46:52 AM Post Details Share Post
Group: Forum Members Posts: 565, Visits: 27K	+x Daniel Biton - 9/6/2024 6:13:12 PM Good evening, I tried to look for answers scrolling the forum, but I have found no answer. When printing each pilot log of a 4 route leg flight, I discovered the fuel level was reset after each landing. This is not a crucial issue, I don't print the remaining fuel column in this case and everything is ok. Did someone found a work around? Thanks a lot. Dan. I think the basis for this is that SD doesn't know if, where, and by how much you would refuel, so leaves it to the user to specify it. The way to deal with it is to adjust the fuel on board at the start of each leg to what you think it will be, based on planned fuel burnt on prior legs. Edited 9/7/2024 12:48:01 PM by grahamb
	Reply Like 2
Daniel Biton	Daniel Biton posted 9/6/2024 6:13:12 PM Topic Details Share Topic
Group: Forum Members Posts: 24, Visits: 307	Good evening, I tried to look for answers scrolling the forum, but I have found no answer. When printing each pilot log of a 4 route leg flight, I discovered the fuel level was reset after each landing. This is not a crucial issue, I don't print the remaining fuel column in this case and everything is ok. Did someone found a work around? Thanks a lot. Dan.
	Reply Like 2