Air Avionics AT-1 with Skydemon

Important: These forums are for discussions between SkyDemon users. They are not routinely monitored by SkyDemon staff so any urgent issues should be sent directly to our Customer Support.

Home
»
Discussion Forums
»
SkyDemon Navigation
»
Air Avionics AT-1 with Skydemon - Connections stops

Air Avionics AT-1 with Skydemon - Connections stops

Author	Message
Tim Dawson	Tim Dawson posted 11/18/2020 10:02:24 AM Post Details Share Post
Group: Forum Members Posts: 8K, Visits: 9.1K	Interesting. That device appears to be sending invalid data through the PGRMZ message, and our parser is detecting that. We do not actually use that message currently, so we will ignore it in the next version of SkyDemon and this problem will go away.
	Reply Like 4
screen	s screen posted 11/18/2020 5:18:15 AM Post Details Share Post
s Group: Forum Members Posts: 20, Visits: 72	+x screen - 11/17/2020 8:50:05 AM On my last flight on November 15th, 2020 I had the same problem with AT-1 and SD, the following message appeared on the Ipad display. The Flarm protocol was set as the connection attached the photo <a href="https://ibb.co/x6Mpw3S"><img src="https://i.ibb.co/5L5NC2W/IMG-1352.jpg" alt="IMG-1352" border="0"></a>
	Reply Like 3
screen	s screen posted 11/17/2020 8:50:05 AM Post Details Share Post
s Group: Forum Members Posts: 20, Visits: 72	On my last flight on November 15th, 2020 I had the same problem with AT-1 and SD, the following message appeared on the Ipad display. The Flarm protocol was set as the connection Edited 11/17/2020 9:45:05 AM by screen
	Reply Like 3
Peter Baier	Peter Baier posted 10/15/2020 8:22:09 PM Post Details Share Post
Group: Forum Members Posts: 9, Visits: 5	+x Peter Baier - 9/25/2020 7:10:46 PM +x jiaolong - 8/15/2020 4:29:59 PM Hi all I have the Air Avionics AT-1 installed and using it at GPS / Traffic information source on my Huawei Pad with Skydemon. From time to time the connection stops and I must initiate the connection again from Skydemon side. I don't know if it is a tablet, a Skydemon or AT-1 issue which stops the connection. Did anyone have the same problems? What tablet do you use? Do you have a work-around? As said, I am not sure if it is a Skydemon issue, but maybe the best place (forum) to start to find the issue. Best regards, Alain Alain, have the same issue with the iPad. Seems this comes from AT-1, which occasionally has probs to provide a stable WiFi. I am presently investigating with AirTraffic company, as soon as I have a solution, I will post it here. My wild guess: Firmware update of AT-1... Cheers Peter After some (friendly!) discussion with Air Avionics I followed their recommendation to set AT-1 WiFi protocol on FLARM Connect and SD third party device to be used in Flying Mode also to FLARM Connect with the KEY of 6001 or higher - since then I observed significant improvement with this issue.
	Reply Like 3
Peter Baier	Peter Baier posted 9/25/2020 7:10:46 PM Post Details Share Post
Group: Forum Members Posts: 9, Visits: 5	+x jiaolong - 8/15/2020 4:29:59 PM Hi all I have the Air Avionics AT-1 installed and using it at GPS / Traffic information source on my Huawei Pad with Skydemon. From time to time the connection stops and I must initiate the connection again from Skydemon side. I don't know if it is a tablet, a Skydemon or AT-1 issue which stops the connection. Did anyone have the same problems? What tablet do you use? Do you have a work-around? As said, I am not sure if it is a Skydemon issue, but maybe the best place (forum) to start to find the issue. Best regards, Alain Alain, have the same issue with the iPad. Seems this comes from AT-1, which occasionally has probs to provide a stable WiFi. I am presently investigating with AirTraffic company, as soon as I have a solution, I will post it here. My wild guess: Firmware update of AT-1... Cheers Peter
	Reply Like 3
Tim Dawson	Tim Dawson posted 8/17/2020 9:14:54 AM Post Details Share Post
Group: Forum Members Posts: 8K, Visits: 9.1K	What exactly happens when "the connection stops"? SkyDemon is designed to automatically reconnect (and keep trying) if your device stops responding.
	Reply Like 2
jiaolong	j jiaolong posted 8/15/2020 4:29:59 PM Topic Details Share Topic
j Group: Forum Members Posts: 7, Visits: 30	Hi all I have the Air Avionics AT-1 installed and using it at GPS / Traffic information source on my Huawei Pad with Skydemon. From time to time the connection stops and I must initiate the connection again from Skydemon side. I don't know if it is a tablet, a Skydemon or AT-1 issue which stops the connection. Did anyone have the same problems? What tablet do you use? Do you have a work-around? As said, I am not sure if it is a Skydemon issue, but maybe the best place (forum) to start to find the issue. Best regards, Alain
	Reply Like 2