That doesn't make it a good idea

They're available at the touch of a finger. That is much better than having every single one written as a piece of text on the chart at all times.

I have just found that the Fis frequency is always displayed at the bottom in the SD vertical profile, that is very helpful during flight. With respect to the display of the nav aid radio frequencies - I was just used to it, because it is a standard feature of the ICAO paper chart.

I miss that a bit. The frequencies directly on the map. Gladly also underlined, to see whether a QDM is present and whether there is a right or left traffic pattern

During flight switch to the PLOG view (tap the blue Skydemon Icon or the Position Report ).  The plog will contain details of relevant frequencies.  See User Manual, Page 66.




George E A Reid

Ipad Mini 5,  IOS 14.4,  SD 3.15.0.288
PC(Win 10, Version 19041.804)  SD 3.15.0.0

Hi , how can I display the radio frequencies of NAV Aids, e.g VORs or radio frequencies of the local FIS sectors , e.g. Langen Information on my chart ?
So far, I am only able to see these frequencies after pushing either my finger on the chart or the VOR - or after pushing the radio button - but this is not very comfortable during flight.
Any suggestions are welcome -