I think the problem here is certain devices not telling SkyDemon when the screen has been rotated, and therefore allowing SkyDemon to adjust the location of the buttons on the (now-redesigned) welcome screen. This "problem" would not have manifested itself before due to the comparatively simple welcome screen that we had in 1.2.

If one or both of you could contact us, we will provide you with a couple of hotfix builds that should address the problem on your devices.

I have exactly the same problem on my 7 Inch GPS,

Almost as if the screen does not resize for portrait mode this used to be the default setting.

Tim has there been some changes in software that would cause this problem if I go back to the old version 1.2 everything works exactly as it should.

I much prefer the option of seeing further ahead than whats 30 miles either side of me.

Regretabbly not, its a generic 5" GPS which doesnt have any setting to do that.

Does the device itself have a setting that allows you to rotate the screen? My Loox (Windows Mobile) does, under Start/Settings/Screen. Change that before starting Skydemon and presumably you'll be ok.



Obviously though, it would be helpful if the Exit/Continue buttons showed whatever the orientation!

Hi ive just upgraded to 1.3, and my old setting had it rotate the screen 90 degrees.



It comes up with the new skydemon page, says loading, rotates screen 90 degrees but at top half of screen so i cannot press continue or Exit so can go no further.



Any ideas