Important: These forums are for discussions between SkyDemon users. They are not routinely monitored by SkyDemon staff so any urgent issues should be sent directly to our Customer Support.

Skydemon displaying PFLARM conflicting traffic info


Author
Message
Birdyboy
Birdyboy
Too Much Forum (2.2K reputation)Too Much Forum (2.2K reputation)Too Much Forum (2.2K reputation)Too Much Forum (2.2K reputation)Too Much Forum (2.2K reputation)Too Much Forum (2.2K reputation)Too Much Forum (2.2K reputation)Too Much Forum (2.2K reputation)Too Much Forum (2.2K reputation)
Group: Forum Members
Posts: 14, Visits: 66
Just got PFLARM going with a nexus10 using butterfly to Wifi to it.
Seems good so far, Flown once for a short flight. Spotted a couple of gliders (green plane shape showing direction with height next to it +3.5 for example) also commercial into luton (ADS-B) presumably.
Yet to see any mode S or C displayed.
Of course it will be the non transponder plane that hits me out of the blue.
But so far impressed.
Using a LX avionics PFLARM core brick in a Europa. Just needed power to install.
I tried to find information on what to expect on the display but couldnt find any info.



Europa farm strip flyer, Bedfordshire, UK
Reply
Birdyboy
Birdyboy
Too Much Forum (2.2K reputation)Too Much Forum (2.2K reputation)Too Much Forum (2.2K reputation)Too Much Forum (2.2K reputation)Too Much Forum (2.2K reputation)Too Much Forum (2.2K reputation)Too Much Forum (2.2K reputation)Too Much Forum (2.2K reputation)Too Much Forum (2.2K reputation)
Group: Forum Members
Posts: 14, Visits: 66
Still struggling with getting this going, first by bufferfly wifi broke. The replacement seemed to work in the hangar a few weeks back. Just been up this afternoon and couldnt get the nexus and pflarm to talk to each other. First attempt since hangar test.
The nexus7 had the wifi link to the bufferfly connect, good signal strength, etc.
Skydemon attempted to find it but couldn't (the code is correct)
Tried on the ground to power cycle both and retried several times restarting skydemon, starting and stopping navigating, disabled wifi and re-enabled etc
1. is there an indication in skydemon that its getting PFLARM comms or that its active? (Seems like an essential requirement)
2. is there an order with wifi should the skydemon be up before the wifi/PFLARM.
3. does skydemon keep on trying ? once it had failed it didn't seem to want to try again ( came back with fail immediately)
4. should the nexus 'discover' the wifi in settings before using skydemon?

I'll try LX avionics as well to see if John has any clues.








Europa farm strip flyer, Bedfordshire, UK
GO

Merge Selected

Merge into selected topic...



Merge into merge target...



Merge into a specific topic ID...





Reading This Topic

Login

Explore
Messages
Mentions
Search