Tim,

you have solved why it is picking up truleigh farm! Where I am sitting right now, that airfield is the closest to my current position, so there is some intelligence as to why I have been 'blighted' by that airfield :o)

As you know having used your products for some years, I have extolled the virtues of the product to all the pilots I met or have instructed.

The iPad mini with skydemon is a perfect fit, 10/10!

Thanks Nje,

That does not seem to be the case for me. If I set the weather to RAW data it remembers it for that session but if I quit or log out of the SD app it always reverts back to decoded even after selecting RAW.

OK, in that case then, I don't think you have any other choice , you'll just have to click the 'raw data' button to see it

Ridders,

Slightly off thread - sorry, but you mention 10/10 for iPad Mini. I'm looking to get one for the cockpit, can this be yoke mounted, and is any of the practical functionality lost due to the reduced screen size - I understand that all the current iPad functions will be there, but just wondering if the reduced screen makes them difficult to use?

Hugh

Regards



Hugh

G-OIBM

Commander 114

There should be no reduced functionality on iPAD mini. I use both ipad & mini. Aside from the screen size there is no difference. There are yoke mounts for both (see Sporty's pilot supplies and others). Personally I simply use them as knee pads, with good uninterrupted GPS reception and not to obstruct the instrument view (Commander). Both deserve full marks when used with SD.

Very Newbytheway

DurhamTeaseAirport

I use the same RAM mount (universal gps holder) as I did with my 5 inch chinese device, Just removed the side claws, and stuck a bit of velcro onto the mini. It holds it perfectly.

But, my birthday is looming and I'll be getting this which is due for release in a few weeks.

http://www.ram-mount.co.uk/apple-ipad-mini-holder-p-1741-c-360_673.html?sesid=kfleifu2qg15ld619hs1p26ug1

I've already got the yoke mount arm (part number RAM-B-121B)and extention arm (part number RAP-B-201) that will be also be needed to attach it to the yoke

Hope this helps